-9%
,

PTZOptics 12X Producer Plus Kit


$5,229.00 $5,752.00

PTZOptics 12X Producer Plus Kit

 

The PTZOptics 12X Producer Plus Kit includes one 12x-SDI Gen2 Live Streaming Camera (Gray), one HC-JOY-G3 Serial Controller Joystick, one Intel NUC i7 Skull Canyon PC, one MOTIV MVi Digital Audio Interface for Mac, Windows, iPhone, iPod, iPad, and Android, one Producer+ Upgrade External PCIe Box, one 100′ 3G-SDI Cable, one 100′ DB9 M-F Cable, one 8″ MiniDP to HDMI cable, two 6′ HDMI cables, and one wired keyboard and mouse. The kit is designed for use with up to 4 HD broadcast cameras and video/audio mixing programs such as vMix, Wirecast, OBS, and xSplit.

The Intel NUC i7 Skull Canyon is a dedicated PC that can be mounted at the back of your display. It is powered by the i7 2.6GHz quad core processor and features the Intel Iris Pro Graphics 580 card that supports resolutions up to 4K at 60 Hz. The PC comes with a 256GB SSD and 32GB DDR4 RAM. It features four SuperSpeed USB 3.0, one Thunderbolt Type-C, two USB 2.0, two USB 3.0, one HDMI, 1 Mini DisplayPort, and one DisplayPort (via Type-C) ports. In addition, the PC comes pre-loaded with Windows 10 operating system.

PTZOptics 12x-SDI Gen2 Live Streaming Camera (Gray)

This is the 12x-SDI Gen2 model of the PTZOptics lineup of advanced live streaming cameras, in gray, featuring a 3G-SDI output for connecting to switching equipment for broadcast conferencing. The Gen2 model is capable of 1080p60/50 recording (instead of a max of 30 fps), and streaming in H.265 and MJPEG in addition to H.264.

This camera has a 3.5 – 42.3mm lens providing a 12x zoom range, allowing for effective close-focus and wide-angle shots to best suit both face-to-face and group meetings. It does well in low-light conditions owing to a fast f/1.8 – f/2.8 lens aperture and minimum illumination requirement of only 0.5 lux at f/1.8. On top of this, built-in wide dynamic range and 2D and 3D noise cancellation further enhance the conferencing experience. The camera, along with its entire family of 20x and 12x models, is completely open source so developers can customize everything as they prefer using simple HTML commands.

In addition to the 3D-SDI output, the camera also has LAN, HDMI, and composite outputs, RS-232 input and output with daisy-chain capability, and an RS-485 port. The SDI, LAN, and HDMI outputs can be used simultaneously at the same resolution, which can be assigned via a dial on the rear. The composite output can only be used by itself and at 480i/576i resolution. The LAN output is capable of streaming two H.264 or two H.265 RTSP signals, one in HD and one in SD, or a single MJPEG signal, and allows for direct distribution to CDNs, streaming services, and other destinations using only the camera. There’s also a 3.5mm audio input for embedding audio into an HDMI signal or LAN stream so you can deliver both audio and video to your destination. The LAN port can be used for streaming and control and also supports Power-over-Ethernet. As an alternative to direct streaming from the LAN port you can also connect external devices for more advanced conferencing. You’ll also find a USB 2.0 port among all the connections, but this is strictly for firmware updates.

The camera can be controlled via the LAN port over a network, ONVIF over a network, and RS-232 via VISCA commands. RS-232 control includes control from any NewTek TriCaster, including any of the TriCaster Mini models. Simply connect multiple cameras to the TriCaster using DB9 cables and operate all of them from its software. A TriCaster can also be used over IP control using third-party software.

A large variety of software is supported, including most online meeting software, mobile apps for control over your network, and the advanced PTZOptics Network Control and VISCA Control applications.

An included IR remote control lets you adjust many settings via an on-screen display, allowing you to set and call presets, and control up to four cameras. You can set up to 64 presets in the camera (and up to 255 via RS-232), with a preset accuracy of 0.1°, and you can call up to 10 presets using the remote. The camera can be used desktop-mounted or ceiling-mounted, using an optional PTZOptics ceiling-mount bracket.

Key Features

  • 3G-SDI output for connecting to professional switching equipment for broadcast conferencing
  • 1080p HD video at up to 60/50 fps
  • LAN, HDMI, and composite outputs, RS-232 input/output, RS-485 port
  • 3.5mm audio input for embedding audio into an HDMI signal or IP stream
  • H.264 and H.265 HD/SD dual-stream, or MJPEG single stream via LAN port
  • SDI, LAN, and HDMI ports are simultaneously live
  • Open source customizable via HTML commands
  • 3.5 – 42.3mm lens with 12x zoom range
  • 1/2.7″ 2.1MP CMOS sensor
  • f/1.8 – f/2.8 lens aperture
  • 0.5 lux minimum illumination at f/1.8
  • Wide dynamic range
  • 2D and 3D noise cancellation
  • Control via LAN over a network, ONVIF over a network, and RS-232 via VISCA commands
  • Control multiple cameras from any NewTek TriCaster, directly from the TriCaster software
  • Set up to 64 presets (or up to 255 via RS-232), with a preset accuracy of 0.1°
  • Use desktop-mounted or ceiling-mounted using an optional bracket
UPC: 737993158769

HuddleCamHD HC-JOY-G3 3rd Generation Serial PTZ Joystick

The HuddleCamHD HC-JOY-G3 3rd Generation Serial PTZ Joystick is a universal PTZ controller for any VISCA, Pelco-D, and Pelco-P protocol camera. You can control up to 255 cameras, with up to six assignable to “Quick Keys.”

This all-metal controller, designed robust to withstand the rigors of daily production, provides zero latency control over RS-232, RS-422, and RS-485 cabling. It does not require a connection to an Ethernet-based network. The maximum communication distance is 3937′ over RS-485 using a 24 AWG twisted pair cable.

Note:

Some camera control options are only available using the VISCA protocol. Pelco-P and Pelco-D do not support Main Exposure and Main Focus joystick buttons.

Magewell Pro Capture Quad SDI Card

Key Features

  • All-metal housing
  • PTZ control for any VISCA, Pelco-D, and Pelco-P protocol camera
  • Zero-latency control over RS-232, RS-422, and RS-485 cabling
  • Three-axis joystick controller with “twist” for zoom control
  • Large LCD menu display
  • Key-press sound (“beep”) confirmation (can be turned on or off)
  • Pan, tilt, zoom, iris, and focus control
  • Preset, speed, and OSD control
  • Auto/manual focus and iris
  • Up to six assignable “Quick Key” cameras
  • Real-time display of the current status
  • Short circuit and overcurrent protection
  • Automatic recovery program for the communication ports
UPC: 737993161325

Shure MVi – Digital Audio Interface for Mac, PC, iPhone, iPod, iPad and Android

The MVi from Shure is a single-channel, simple-to-use, digital interface for connecting microphones and instruments to Mac and Windows computers, as well as the range of iOS and Android devices. Simple and flexible, the unit features an XLR + 1/4″ TS combo input jack for microphones and instruments, five DSP presets, and a touch panel that allows real-time access to volume, gain and mode selection functions. Phantom power for condenser microphones, appropriate cabling, and a rugged all-metal construction make for reliable digital recording wherever needed.

Connect any standard XLR microphone or 1/4″ plug for guitar, bass or keyboard to any iOS device, Mac or PC for seamless audio capture
Five built-in DSP preset modes
Phantom power
Touch panel allows volume, gain and mode selection adjustments
Headphone output
Includes appropriate cables

PTZOptics Producer+ Upgrade External PCIe Box

The Producer+ Upgrade External PCIe Box from PTZOptics comes pre-installed with a Magewell Pro Capture Quad SDI Card (4-Channel). The box features a Thunderbolt 3 interface with two USB Type-C ports and a dedicated DisplayPort for a second monitor.

The Pro Capture Quad SDI Card from Magewell is a normal-profile PCIe Gen2 x4 card that allows for capturing four channels of SDI input. The card supports multiple color sampling modes, 10- and 12-bit color depths, up to eight audio channels at 48 kHz, and output resolutions up to 2048 x 2048 with frame rates up to 120 fps. The card is also capable of numerous video processing features including cropping, scaling, deinterleaving, aspect ratio conversion, color format conversion, video frame rate conversion, and video OSD composition.

The Pro Capture Quad SDI Card supports multiple cards per system and unlimited output streams with independently adjustable parameters per stream. Additional features include ultra-low latency, timestamp and A/V synchronization, and LED status indicators. The card supports Windows, Linux, and Mac operating systems, multiple APIs for Windows and Linux, and provides Windows SDKs for easier integration.

Magewell Pro Capture Quad SDI Card

SDI Input

  • Integrated cable equalizer supports cable lengths up to 755′ for HD signals
  • Supports SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS standards
  • Supports 2K (2048 x 1080) mode
  • Supports RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
  • Supports 10/12-bit color depth
  • Supports extraction of SMPTE 352 payload identifier
  • Supports up to eight audio channels at 48 kHz
  • Supports extraction of audio formation information and channel status data
  • Limited support for 3Gb-DS; only the first stream can be captured
  • Limited support for 3Gb-DL; 2K YCbCr 4:2:2 10-bit 1080p 50/59.94/60 stream is captured as 1080i 50/59.94/60
  • Other modes fully supported
  • Limited support for the first link of dual-link interfaces
  • YCbCr 4:2:2 10-bit 1080p 50/59.94/60 is captured as 1080i
  • YCbCr 4:4:4 10-bit is captured as 4:2:2
  • RGB 4:4:4 is captured as R/B sub-sampled

Video Processing

  • Two video processing pipelines with approximately 180MP/s processing bandwidth for each
  • Supports full 10-bit video processing
  • Video cropping and scaling
  • Video deinterlacing (wave, blend top and bottom field, top field-only, bottom field-only)
  • Aspect ratio conversion: Automatic or manual selection of input and output aspect ratios
  • Three aspect ratio conversion modes: ignore (anamorphic), cropping, or padding (letterbox or pillarbox)
  • Video color format conversion: Automatic and manual selection of input/output color formats, quantization ranges, and output saturation range
  • Supports RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
  • Limited or full quantization range
  • Limited, full, and extended gamut saturation range
  • Video frame rate conversion
  • Video OSD composition: PNG OSD image up to 2048 x 2048; dynamic loading of RGBA OSD image via SDK

Multiple Cards per System

  • Supports multiple cards plugged into one system
  • Onboard rotary switch to set card number, with 16 positions from 0 to F
  • System hardware device tree will display “01: Pro Capture AIO” when rotary switch is set to 1, and so on
  • The video and audio device names displayed in your software will include the card number (set by the rotary switch)

Multiple Output Streams

  • Unlimited output streams for any one input channel
  • Independent cropping, aspect ratio, color format, resolution, frame rate, deinterlacing, and color adjustment settings for each individual stream

Ultra-Low Latency Support

  • Latency of 64 video lines
  • Partial notification mode in SDK

Timestamp and AV Synchronization

  • Hardware-based 100ns high-resolution clock
  • Audio frames (192 audio samples) and video frames are stamped with hardware clock
  • Hardware clock can be synchronized across cards (via SDK)

Video Output SG-DMA

  • Supports auto-detection of Intel tiled GPU surface
  • Supports DirectGMA for AMD video adapter chipsets
  • Supports GPUDirect for NVIDIA video adapter chipsets
  • 400 MB/s per channel DMA bandwidth in a PCIe 2.0 system
  • 200 MB/s per channel DMA bandwidth in a PCIe 1.0 system

SDK

  • Pro Capture SDK for DirectShow for easy integration (Windows)
  • Pro Capture SDK for DirectKS for maximum flexibility and performance (Windows)

Windows Driver Tweaks

  • All options can be controlled by three levels of registry key: global level, product level, and device level
  • Video, audio, and crossbar filter names can be customized via registry keys

Firmware Upgrade

  • Multiple cards in one system can be upgraded simultaneously
  • Cards can be upgraded without a system power shutdown when not in use
  • Supports Safe upgrade. If power-off or system breakdown occurs when the firmware is being upgraded, it will automatically restore to the initial version (only available for firmware version 1.21 and above)

AkiTio Thunder3 PCIe Expansion Box

  • Thunderbolt 3 for lightning-fast transfer speeds up to 40 Gb/s
  • Dedicated DisplayPort for additional monitor to expand the workspace
  • Second Thunderbolt port supports Thunderbolt 3, USB 3.1, and DisplayPort devices
  • One PCIe (x16) slot supporting half-length, full-height, double-width cards
  • Four-lane PCI Express 3.0 compliant interface
  • Removable back panel for double-width cards
  • Daisy-chain up to six Thunderbolt devices
  • Durable and rugged aluminum casing
  • No tools required for installation
UPC: 065030868440
Categories: ,

PTZOptics 12x-SDI Gen2 Live Streaming Camera (Gray) Specs

Image Sensor 1/2.7″ CMOS progressive, 2.12 MP
Capture Resolution 1080p 60/50/30/25
1080i 60/50
720p 60/50
576i
480i
Video Standards NTSC, PAL
Lens Integrated 3.5 – 42.3mm, f/1.8 – f/2.8
Zoom Optical: 12x
Digital: 16x
Angle of View Horizontal: 6.9° (tele) to 72.5° (wide)
Vertical: 3.9° (tele) to 44.8° (wide)
Minimum Illumination 0.5 lux at f/1.8, AGC on
Shutter Speed 1/30 – 1/10000 sec
SNR ≥55 dB
Flip / Mirror Supported (vertical)
Working Environment Indoor
Pan Movement ±170°
Tilt Up: 90°
Down: 30°
Presets Up to 64 presets (255 presets via RS-232)
Connectors Video Outputs:
1 x 3G-SDI
1 x HDMI (1.3)
1 x RJ45 (10 m/100 m adaptive Ethernet port) (IP network interface)
1 x 3.5 mm Composite

Audio Interface:
1 x 3.5 mm line in (for embedding into HDMI and IP stream only)

Communication Interface:
1 x RS-232 input (8-pin mini-DIN) (98 ft / 30 m distance)
1 x RS-232 output (pass-through) (8-pin mini-DIN) (98 ft / 30 m distance)
1 x RS-485 (2-pin Phoenix port) (4920 ft / 1500 m distance)

Firmware Updates:
1 x USB 2.0

*RS-232 / RS-485 Protocols: VISCA/Pelco-D/Pelco-P

Baud Rate 2400 / 4800 / 9600 bits
Power Supply Input: 12 VDC (10.8 – 13.0 VDC)
JEITA power adapter (12 VDC in) included
PoE Supported via LAN port
Power Consumption 24 W (Max)
Operating Temperature 23 to 104°F / -5 to 40°C
Storage Temperature -4 to 140°F / -20 to 60°C
Dimensions (W × H × D) 5.6 x 6.6 x 5.9″ / 14.2 x 16.8 x 15.0 cm
With Tilt Up: 5.6 x 7.3 x 5.9″ / 14.2 x 18.5 x 15.0 cm
Weight 3 lb / 1.4 kg
Packaging Info
Package Weight 5.49 lb
Box Dimensions (LxWxH) 11.25 x 9.2 x 9.15″

HuddleCamHD HC-JOY-G3 3rd Generation Serial PTZ Joystick Specs

Box
Connections 1 x RS-232 on DB9
1 x RS-422 / RS-485 on Phoenix
Baud Rate 1200 to 19200 bps
Cameras Supported 255
Presets 255
Maximum Cable Distance 3937′ / 1200 m (Using 24 AWG Twisted Pair)
Power 6 W, 12 VDC
Operating Temperature 14 to 122°F / -10 to 50°C
Humidity (Non-Condensing) 10 to 90%
Dimensions 12.6 x 7.1 x 4.3″ / 32 x 18 x 11 cm
Weight 3.4 lb / 1.6 kg
Packaging Info
Package Weight 5.3 lb
Box Dimensions (LxWxH) 16.7 x 10.5 x 6.8″

Shure MVi – Digital Audio Interface For Mac, PC, IPhone, IPod, IPad And Android Specs

Connections 1 XLR/TS combo Input
1 x 1/8″ (3.5 mm) TRS Headphone Out
1 x micro USB Type-B
Packaging Info
Package Weight 1.1 lb
Box Dimensions (LxWxH) 8.3 x 3.9 x 3″

PTZOptics Producer+ Upgrade External PCIe Box Specs

Capture Card
Input Interface 4 x BNC (3G/HD/SD-SDI)
Output Interface PCIe Gen2 x4
Supported OS Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
Linux (based on V4L2, supports x86, x64 & arm architecture)
Mac OS X
Supported APIs Windows: DirectShow, DirectKS, Wave API/DirectSound/WASAPI
Linux: V4L2, ALSA
Supported Software VLC, VirtualDub, OBS, xSplit, vMix, VidBlaster, Wirecast, Microsoft Media Encoder, Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software
Video Output Format Image resolutions up to 2048 × 2048
Frame rates up to 120 fps (actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions; above 1280 × 1024)

4:2:0 8-bit output formats; NV12, I420, YV12
4:2:2 8-bit output formats; YUY2, YUYV, UYVY
4:4:4 8-bit output formats; V308, IYU2, V408, BGR24, BGR32
4:4:4 10-bit output formats: V410, Y410
More output formats are supported via Pro Capture SDK for DirectKS

Video Output SG-DMA 400 MB/s per channel DMA bandwidth in a PCIe 2.0 system
200 MB/s per channel DMA bandwidth in a PCIe 1.0 system
LED Indicator Per Channel: idle, input signal locked, memory failed, or FPGA configuration failed
Power Consumption Maximum Current at 12 V: 0.6 A
Maximum Current at 3.3 V: 2.4 A
Maximum Power Consumption: 14.3 W
Operating Temperature 32 to 104°F / 0 to 40°C
Storage Temperature -4 to 158°F / -20 to 70°C
Relative Humidity 5 to 90%, non-condensing
Form Factor Normal profile PCIe x1 add-on card
4.4 x 4.1″ / 112.2 x 102.9 mm, without PCI bracket
Box
Certifications CE, FCC, VCCI, Thunderbolt technology
Case Material High-quality aluminum with metal chassis
Application 1 x PCIe card
Supports half-length, full-height, and double-width cards
PCIe (x16) slot provides a maximum of 25 W

Note: Not designed for graphics cards

Interface/Ports 2 x Thunderbolt 3 (USB-C) ports
1 x DisplayPort 1.1
1 x Internal PCIe (x16) slot with 4-lane PCI Express 3.0 interface
Data Transfer Thunderbolt 3 up to 40 Gb/s
DisplayPort 1.1a (4K at 60 Hz)
System Requirements (PC) Windows 7 and later computer with Thunderbolt 3 port
Temperature & Humidity Operating Temperature: 41 to 95°F / 5 to 35°C
Storage Temperature: -4 to 140°F / -20 to 60°C
Relative Humidity: 5 to 95%, non-condensing
Power External power adapter (UL, cUL, CE, FCC, BSMI, TUV approved)
Input: 100 to 240 VAC, 50/60 Hz
Output: 12 VDC, 6 A
Fan Noise Level 23 dBA
Dimensions 9.17 x 5.87 x 2.99″ / 23.3 x 14.9 x 7.6 cm
Weight Not specified by manufacturer
Packaging Info
Package Weight 7.28 lb
Box Dimensions (LxWxH) 13.9 x 11.4 x 5.9″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PTZOptics 12X Producer Plus Kit”

There are no reviews yet.