, , ,

Shure P3TR112GR PSM 300 WIRELESS IN EAR SYSTEM


$749.00

PSM 300 Wireless In-Ear Monitor System with P3R Bodypack Receiver, and SE112-GR Earphones

 

PSM 300) is available as both an entry-level system for first-time in-ear monitor users, and as a professional system for rental houses, monitor engineers and musicians needing more advanced options. PSM300 Stereo Personal Monitor Systems provide reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding delivers the clearest sound, with ultra-low noise and no artifacts.

Includes

  • P3R Wireless Bodypack Receiver
  • P3T Half-Rack Single Channel Wireless Transmitter
  • SE112 Single-Driver Sound Isolating Earphones
  • Rackmount and harware kits
  • ¼-Wave Antenna
  • BNC Bulkhead Adapter
  • BNC Cable
  • Power Supply
  • Two (2) AA Batteries
  • Zipper Bag
  • User Guide

Features

  • Includes P3R bodypack receiver, P3T single-channel trasmitter, and SE112 isolating earphones
  • Rackmount and hardware kits included
  • One-touch frequency scan and sync
  • Audio Reference Companding delivers the clearest sound and no artifacts
  • Easy to set up and operate for entry-level users

Specifications

  • Overall System:
    • RF Carrier Range: 488 – 937.5 MHz (Note: varies by region)
    • Compatible Freqeuncies Per Band: Up to 15
    • Tuning Bandwidth: 24 MHz maximum (Note: varies by region)
    • Operating Range: 300 ft (90 m)
    • Audio Frequency Response: 38 Hz – 15 kHz
    • Signal-to-Noise Ratio: 90 dB (typical)
    • Total Harmonic Distortion: < 0.5% (typical) (ref. ±34 kHz deviation @ 1 kHz)
    • Companding: Patented Shure Audio Reference Companding
    • Spurious Rejection: > 80 dB (typical)
    • Frequency Stability: +/- 2.5 ppm
    • MPX Pilot Tone: 19 kHz (+/- 1 Hz)
    • Modulation: FM, MPX Stereo (ref. +/- 34 kHz deviation @ 1 kHz)
    • Operating Temperature: 0° F to 145° F (-18° C to +63° C)
  • SE112 Earphones:
    • Speaker Type: Single Dynamic MicroDriver
    • Sensitivity: 108 dB SPL/mW
    • Frequency Range: 25 Hz – 17 kHz
    • Cable Style: 50″ Fixed
    • Colors: Gray
  • P3R Receiver:
    • Active RF Sensitivity (at 20 dB SINAD): 2.2 µV
    • Image Rejection: > 90 dB
    • Adjacent Channel Rejection: > 60 dB
    • Intermodulation Attenuation: > 50 dB
    • Blocking: > 60 dB
    • Audio Output Power (1 kHz @ < 1% distortion, peak power, @ 32 Ohms): 80 mW (per output)
    • Minimum Load Impedance: 16 Ohms
    • Headphone Output: 1/8″ (3.5 mm) stereo
    • Net Weight (without batteries): 3.5 oz. (98 g)
    • Dimensions (HxWxD): 4.3″ x 2.5″ x 0.8″ (110 x 64 x 21 mm)
    • Battery Life: 5 – 7 hours (continuous use) AA batteries
  • P3T Transmitter:
    • RF Output Power: 10, 20, 30 mW (Note: varies by region)
    • RF Output Impedance: 50 Ohms (typical)
    • Net Weight: 27.6 oz. (783 g)
    • Dimensions (HxWxD): 1.7″ x 7.8″ x 6.8″ (43 x 198 x 172 mm)
    • Power Requirements: 12 – 15 V DC, 260 mA maximum
Weight 2 lbs
Dimensions 8 × 4 × 2 in
10, 20, 30 mW
Note: varies by region
RF Output Impedance 50 Ohms (typical)
Transmission Range 300′ (90 m)
Audio Input
Connector Type 1/4″ TRS (6.35 mm)
Polarity Tip positive with respect to ring
Configuration Electronically balanced
Impedance 40 kOhms (actual)
Nominal Input Level Switchable, +4 dBu, -10 dBV
Maximum Input Level +4 dBu: +22 dBu
-10 dBV: +12.2 dBu
Pin Assignments Tip=hot, Ring=cold, Sleeve=ground
Phantom Power Protection Up to 60 VDC
Audio Output
Connector Types 1/4″ TRS (6.35 mm)
Configuration Electronically balanced
Impedance Connected directly to inputs
General
Antenna 1/4 wave, detachable
Power Requirement 12 to 15 VDC, 260 mA maximum
Dimensions 1.7 x 7.8 x 6.8″ (43 x 198 x 172 mm)
Net Weight 27.6 oz (783 g)
Packaging Info
Box Dimensions (LxWxH) 18.5 x 14.6 x 4.5″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Shure P3TR112GR PSM 300 WIRELESS IN EAR SYSTEM”

There are no reviews yet.