-18%
, ,

Sennheiser XSW2-ME3 Wireless Headset Microphone System (A: 548 to 572 MHz)


$449.95 $549.00

Sennheiser XSW2-ME3 Wireless Headset Microphone System (A: 548 to 572 MHz)

 

The Sennheiser XSW2-ME3 Wireless Headset Microphone System features a true diversity receiver, a compact bodypack transmitter, and an ME 3-II headset microphone with a locking 1/8″ mini-jack connector. It has 12 compatible channels and is offered as an easy to use, all-in-one wireless system for presenters, moderators, and other live-sound applications.

The system is built with automatic frequency management and synchronization so you don’t have to scramble to find an available channel. It offers an intuitive LCD display, two external antennas, and is built with a metal receiver housing. In addition, a rackmount kit, power supply, carry pouch, and two AA batteries are also included.

Lightweight ME 3-II headset mic for hands-free operation and a compact bodypack transmitter
True diversity receiver with metal housing
External antennas
Automatic frequency management and synchronization
Remote channel for easy setup
Fully tunable over a wide range of UHF frequencies
Rackmount kit included
Up to 12 compatible channels
UPC: 615104279513

Sennheiser XSW 2-ME3 Specs

System
Modulation Wideband FM
Frequency Range A: 548 to 572 MHz
Switching Bandwidth Up to 24 MHz
Frequencies Adjustable in 25 kHz steps
8 frequency banks, each with up to 12 factory-preset channels
Signal to Noise Ratio ≥ 103 dBA
Total Harmonic Distortion (THD) ≤ 0.9%
Temperature Range Operation: 32 to 104°F (0 to 40°C)
Storage: -4.0 to 158°F (-20 to 70°C)
Transmitter Synchronization 2.4 GHz, low power OQPSK (only active during synchronization)
Receiver
Principle of Operation Double superheterodyne
Diversity Method True diversity
Sensitivity < 3 µV at 52 dBA rms S/N at (peak deviation)
Frequency Response 50 Hz to 16 kHz (-3 dB)
Maximum AF Output Voltage At peak deviation, 1 kHz AF
1/4″ (6.3 mm) Jack Socket (Unbalanced): +6 dBu
XLR Socket (Balanced): +12 dBu
Adjustment Range Audio: 40 dB, adjustable in 5 dB steps
Power Supply 12 VDC nominal, 300 mA
Squelch Adjustable from 3 dBμ V to 28 dBμ V (combined with pilot tone)
Line/Mic Level 20 dB, switchable
Housing Material Rugged metal housing
Dimensions (W x H x D) 7.9 x 1.7 x 5.0″ (200 x 42 x 127 mm)
Weight 24 oz (680 g)
Transmitter
RF Output Power 10 mW
AF Frequency Response 50 Hz to 16 kHz (Line)
80 Hz to 16 kHz (Mic)
Audio Input 1/8″ (3.5 mm) jack socket
Input Voltage Maximum at 3% THD:
Mic: Typ. 1.5 V rms
Line: Typ. 2.6 V rms @ -30 dB gain
Power Supply 2 x AA size batteries, 1.5 V
Operating Time Approximately 10 hours
Sensitivity Adjustment Range: 0 to -30 dB, adjustable in 10 dB steps
Housing Material Rugged ABS housing
Dimensions (W x H x D) 2.8 x 3.8 x 1.1″ (71 x 96 x 28 mm) approximate
Weight 3.4 oz (95 g) approximate
Microphone
Transducer Principle Condenser, pre-polarized
Sensitivity 1.6 mV/Pa
Pickup Pattern Cardioid
Maximum SPL 150 dB
Dimensions Not specified by manufacturer
Weight Not specified by manufacturer
Packaging Info
Package Weight 4.86 lb
Box Dimensions (LxWxH) 13.75 x 12.7 x 3.65″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Sennheiser XSW2-ME3 Wireless Headset Microphone System (A: 548 to 572 MHz)”

There are no reviews yet.

Leaving so soon?Register for our weekly product deals!

We send out weekly deals without you having to lift a finger. Simply subscribe to our email list to receive the best deals on our top products every week. We promise not to inundate you with emails, and should you lose interest you can unsubscribe at any time.