Description

Williams Sound DL 102 SY1Counter Loop Amp with Surface Mic, Loop Pad, Accessories

The DL102 SY1 from Williams AV is a package built around their DL102 Loop Amplifier, and includes accessories for constructing it into a useful system. The DL102 Loop amplifier itself provides a practical solution for a user to hear with their T-coil enabled hearing device in small areas such as counters and service desks. The audio signal is fed into the DL102 amplifier via a line-level input or microphone. Then, the audio is sent from the amplifier to the loop wire located in the area where a T-coiled hearing device can pick-up the audio.

With no direct connection between user and service personnel, users can hear effectively when using the T-coil within their customized hearing devices. This particular system package comes supplied with a loop pad, and a spool of wire, as well as other accessories used for installation purposes.

Includes

• DL102 amplifier
• Power supply
• AC line cord
• Loop notice stickers
• Set of adhesive cable clips
• MIC 105 – Microphone
• PLW 037 (120ft Spool of wire)
• PLM 001 – Loop Pad

Specifications

• DL 102 SY1:
  • Audio Input: 3 (1 microphone or line input, isolated line input, Mic)
  • Connector Type: 3.5mm jack, Mic-2 pole line in, 3 pole line in, Mic in
  • Power Supply: 12V DC 1.5 A output
  • Power Voltage: 100 to 240 VAC, 50/60 Hz – 2.0 A Input
  • Dynamic Range: > 60 dB
  • THD: THD+N < 0.5% – 1 kHz
  • Amplifier Type: Constant current
  • Loop Resistance: 0.1 Ω to 1.0 Ω
  • Current Output: 2 A RMS at 1 kHz (2.8 APK)
  • Protection: Thermal, short-circuit and start
  • Dimensions: 3.9” x 2.3” x 1” (100mm x 60mm x 25mm)
  • Amplifier Weight: 0.48 lbs. (218 g)
• PLM 001 Loop Pad:
  • Lead Wire Length: 16ft (5m)
  • DC Resistance: 1.3 Ω
  • Weight: 0.5 lbs. (225 g)
  • Pad: 14″ (0.4m) square
  • Wire In Pad: 10-turn loop
• PLW 037 Wire Spool:
  • Length: 120ft
  • Spool Dimensions: 6.5″ Diameter
  • Spool Weight: 9.8 lbs.
  • Color/Material: White