,

Furman CN-2400S SmartSequencing Power Conditioner (20A)


$679.00

Furman CN-2400S Overview

 

 

The 20A SmartSequencing Power Conditioner from Furman is designed for commercial A/V installers and combines robust control capabilities via SmartSequencing Technology, advanced AC protection, AC noise filtration, and optional compatibility with the BlueBOLT Remote Power and Energy Management Platform (BB-RS232 adapter required and sold separately). It combines AC power distribution, protection, filtration, and sequential system power on/off in a 1RU, 120VAC, rackmount unit.

This sequencer features SmartSequencing technology, which allows large and complex A/V systems to be safely powered on and off with a simple press of a button or turn of a key, even by nontechnical personnel. SmartSequencing’s bidirectional communications between installed units enables a primary unit to control and sequence multiple secondary units, ensuring that multizone electronic systems are powered on and off safely and dependably from a single control point across an entire installation. Units can be connected via current loop at runs of more than 1000′ (304.8m) with backwards compatibility with other Furman sequencers.

In addition, the CN-2400S offers robust control options, being equipped with RS-232 ports and command sets for integration with control systems. An RS-232-to-Ethernet adapter (sold separately) adds full IP-addressability to the unit, allowing it to be controlled, programmed, and monitored from a smartphone, tablet, PC, or any Web-enabled device via Telnet, direct HTTP connection, or Panamax/Furman’s BlueBOLT-hosted remote power and energy management platform.

Surge Protection

SMP (Series Multi-Stage Protection) technology provides a high level of surge and spike protection. It ensures zero downtime for mission-critical installations by safely absorbing, clamping, and dissipating transient surges and spikes without damage to internal circuitry or connected equipment.

Noise Filtration

LiFT (Linear Filtration Technology) reduces AC noise linearly across a very wide bandwidth for enhanced audio and video clarity. LiFT ensures maximum performance from connected equipment.

Voltage Protection

Extreme Voltage Shutdown (EVS) circuitry safely powers down itself and connected equipment during unsafe voltage periods. EVS safeguards from catastrophic undervoltage (under 80V sustained) or overvoltage (over 145V sustained) conditions. Circuit may be set to auto-reset when voltage returns to normal or manual reset after an event is detected.

SmartSequencing

SmartSequencing allows bidirectional, safe sequenced power up/down operations of large and complex A/V systems via the push of a button or turn of a key, even by nontechnical personnel.

Diagnostic Lights

Diagnostic lights provide valuable system information including power quality, protection ok indicator, and extreme voltage indicator.

Remote Access (RS-232)

RS-232 compatibility and command set provide integration with control systems, open source, and control programming. RS-232 to Ethernet adapter (sold separately) allows for control, programming, and monitoring from any Web-enabled device via Telnet, direct HTTP connection, or Panamax/Furman’s BlueBOLT platform.

BlueBOLT Compatible

BlueBOLT provides remote access to reboot components, power equipment on/off, and monitor power quality via the Internet from anywhere in the world.

Nine Total Outlets

The CN-2400S contains 8 rear-panel NEMA 5-20R outlets and 1 front panel NEMA 5-20R outlet.

Additional

  • Multiple units may be daisy-chained at runs of over 1000’ (304.8m) between units with bidirectional communications between units for sequencing on and off large and/or complex systems.
  • Security covers and sequence on/off keyswitch prevent unauthorized personnel from running/shutting down system or tampering with DIP switches.
  • Fire alarm shutoff
  • 20A capacity
  • Safety agency (NRTL-C) listed and RoHS compliant
  • Faceplate with integrated rack ears: 19” (standard rack mounting width)

UPC: 654061028468

Maximum Current Rating 20 A, 120 VAC (Thermal Breaker)
Cord AC: 3/12 AWG, 10′ (3 m), Black, Fixed, NEMA 5-20P Plug
Receptacles Rear-Panel Outlets: 2 x Unswitched NEMA 5 20R (1 Duplex), 6 Sequenced NEMA 5 to 20R (3 Duplexes Each Controlled by Separate Relay)
Front Panel: 1 x NEMA 5 to 15R Convenience Outlet, Unswitched
Protection AC Surge Protection: SMP
Spike Protection Mode: Line to Neutral, Zero Ground Leakage
Spike Clamping Voltage: 188 VAC Peak at 6000 V / 3000 A
Response Time: 1 Nanosecond
Maximum Surge Current: 6500 A
AC Undervoltage Protection: EVS, 77±3 VAC
AC Overvoltage Protection: EVS, 145±5 VAC
AC Overvoltage Reset Modes: Manual and Auto-Reset (Configurable)
Filtering AC:
LiFT
Noise Attenuation: Linear, 10 dB at 10 kHz, 40 dB at 100 kHz, 50 dB at 500 kHz
Operating Temperature Range 40 to 105°F (5 to 40°C)
Humidity Range <90% (Relative Humidity)
User Interface Keyswitch: Front-Panel, 3-Position Key-Switch (On, Off, Remote)
Keys: Included, 1 Pair
Pushbutton Switch: Front-Panel (Hidden by Security Cover)
Circuit Breaker: Front-Panel, Push-Button, 20A Thermal Breaker
Front-Panel Diagnostic Indicators: Primary Link, Secondary Link, Ethernet, Remote Off, Delay 1, Delay 2, Delay 3, Power Protection On, Extreme Voltage
Front-Panel DIP Switches (Hidden by Security Cover): 1-Minute Delay, 2-Minute Delay, 4-Minute Delay, Force Off NO/NC, 12 V Mode On/Off, GND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
Potentiometer: Front-Panel, Time Calibration (Hidden by Security Cover), Fine Tune Delay Adjust
Control Remote Terminal: +5 to 30 VDC In, 12 VDC (12 mA) Out
SmartSequencing: Phoenix-Type 4-pin Connector, Screw Terminals, Primary and Secondary Links (Current Loop: 1000′ (304.8 m) Nominal)
Remote Terminal: Phoenix 4-Pin Connector with Screw Terminals; +12 V, STAT, REM, GND, DLY_OUT (Class-2 Wiring)
Force Off/Delay 3 Terminal: Phoenix 5-Pin Connector with Screw Terminals, Force Off (Class-2 Wiring)
RS-232 Compatible: Yes, DB-9 Connector
IP Accessibility: Optional, Via BB-RS232 Ethernet/RS-232 Adapter (Sold Separately) for IP Control (Sold Separately) via Telnet, HTTP, or BlueBOLT
Voltmeter: Available with RS-232/Ethernet Option, ±2 VAC Accuracy
Ammeter: Available with RS-232/Ethernet Option, ±0.3 A Accuracy
Power Consumption No Load: 10 W
Safety Agency Approval NRTL-C, CSA/NRTL Compliant
Dimensions (W x H x D) 19.0 x 10.5 x 1.7″ (48.2 x 26.6 x 43.1 cm)
Weight 12 lb (5.4 kg)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Furman CN-2400S SmartSequencing Power Conditioner (20A)”

There are no reviews yet.

Leaving so soon?Register for our weekly product deals!

We send out weekly deals without you having to lift a finger. Simply subscribe to our email list to receive the best deals on our top products every week. We promise not to inundate you with emails, and should you lose interest you can unsubscribe at any time.