, , , ,

Peavey IPR2-2000 Power Amplifier


Compare

$399.99

 Peavey IPR2-2000 Power Amplifier

IPR2™ power amplifier, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT™ (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2’s high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.

Features

  • 2- Channel independent fourth-order Linkwitz-Riley crossovers
  • DDT
  • Revolutionary IPR class D topology
  • Detented input controls
  • Speakon output connectors
  • Light Weight
  • LED illuminated
  • Combi XLR 1/4″ inputs
  • Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz.
  • Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz.
  • Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz.
  • Individual signal pass 1/4″ jacks on each channel
  • Weight Unpacked: 8.16 lb(3.7 kg)
  • Weight Packed: 10.80 lb(4.9 kg)
  • Width Packed: 12.4″(31.496 cm)
  • Height Packed: 21″(53.34 cm)
  • Depth Packed: 4.7″(11.938 cm)

Item# PVYIPR2200

 

UPC 014367621716

 

SKU: PVYIPR2-2000 Categories: , , , , Tag:

Peavey 2000 specs

Power Rated Watts (2 Channels at 2 Ohms): 1100 W 20 ms repetitive burst / 900 W 1% THD, both channels driven at 1 kHz
Rated Watts (2 Channels at 4 Ohms): 600 W 20 ms repetitive burst / 570 W 1% THD / 530 watts 0.15% THD, both channels driven at 1 kHz
Rated Watts (2 Channels at 8 Ohms): 370 W 20 ms repetitive burst / 325 W 1% THD / 300 W 0.15% THD, both channels driven at 1 kHz
Minimum Load Impedance 2 Ohms
Frequency Response Frequency Response: 10 Hz to 30 kHz; ±3 dB at 1 W, 8 Ohms
20 Hz to 20 kHz (2 Channels x 2 Ohms): <0.25% at 650 W 20 Hz to 4 kHz, decreasing to 530 W at 20 kHz, both channels driven
20 Hz to 20 kHz (2 Channels x 4 Ohms): <0.15% at 470 W 20 Hz to 10 kHz, both channels driven
20 Hz to 20 kHz (2 Channels x 8 Ohms): <0.15% at 260 W 20 Hz to 10 kHz, both channels driven
Input CMRR > -69 dB at 1 kHz
Voltage Gain x 60 (+35 dB)
Crossover 100 Hz switchable 2nd order high pass and 3rd low pass per channel
Crosstalk > -70 dB at 1 kHz at 250 W power at 8 Ohms
Hum and Noise > -105 dB, “A” weighted referenced to rated power at 4 Ohms
Slew Rate > 12 V/μs
Damping Factor > 170:1 at 20 Hz to 1 kHz at 8 Ohms
Input Sensitivity .775 V ±3% for 1 kHz 4-Ohm rated power, .68 V ±3% for 1 kHz 2-Ohm rated power
Input Impedance 15 kOhms balanced
7.5 kOhms unbalanced
Current Draw Current Draw (at 1/8 Power in VA (W): 540 (315) at 2 Ohms, 370 (185) at 4 Ohms, 240 (115) at 8 Ohms
Current Draw (at 1/3 Power in VA (W): 1250 (760) at 2 Ohms, 750 (425) at 4 Ohms, 460 (240) at 8 Ohms
Idle Consumption 90 VA, 40 W
Cooling Temperature dependent variable speed 3.1″ / 80.0 mm DC fan
Controls 2 x front panel attenuators, crossover select switch for HPF, Normal, and LPF
Indicator LEDs 5 x LED Indicators per Channel: Active, Signal, DDT, Temperature, and DC
Protection Thermal, DC, subsonic, incorrect loads, under voltage, and over voltage
Connectors Inputs: Dual Combination XLR-1/4″ / 6.35 mm
Outputs: Dual 1/4″ / 6.35 mm signal patch, dual twist lock connectors
Construction 0.062″ / 1.575 mm thick aluminum
Dimensions (W x H x D) 19.0 x 3.5 x 10.5″ / 482.6 x 88.9 x 266.7 mm
Handle: 0.6″ / 15.2 mm
Weight 7.12 lb / 3.23 kg
Packaging Info
Package Weight 12.2 lb
Box Dimensions (LxWxH) 22.0 x 15.0 x 7.0″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Peavey IPR2-2000 Power Amplifier”

There are no reviews yet.