Electro-Voice ETX-35P – Three-Way Powered Loudspeaker

Electro-Voice ETX-35P – Three-Way Powered Loudspeaker





The ETX-35P from Electro-Voice is a high-power three-way loudspeaker that is suitable for a variety of portable and permanent applications. The DSP (Digital Signal Processing) menus offer extensive configurations, crossovers, selective voicing, protection limiters, EQ modes, and a lockout mode that prevents casual changes to the system. The system performance is optimized via an LCD screen and the front LED indicates power, or can be configured to indicate limit.

The high-sensitivity transducers have been optimized for precise coverage and low distortion. The subwoofer is manufactured using composite cone materials, flux stabilizing rings, and thermal management, yielding lower distortion, smooth response, and the ability to handle high SPL. The high-efficiency DH3-B compression driver (tweeter) has a convex diaphragm driving a coherent phase device, thereby extending frequency response to 20 kHz.

The company’s FIR-Drive (Finite Impulse Response) technology utilized the latest filter technology to optimize transducer linearity, and advanced limiter algorithms for independent peak and thermal transducer protection. The enclosure is constructed out of 18-mm, 13-ply birch plywood finished with EVCoat. Designed for floor, stacked, or a combo pole cup installation, the speaker also features eight M10 threaded suspension points.

Three-way loudspeaker that can be used in a variety of portable and permanent applications
Optimized for precise coverage and low distortion
2000 W amplifier and 136 dB peak SPL
Single-knob DSP includes presets for multiple configurations and top+sub combinations (performance style, locations, and space)
System performance monitoring via integrated LCD and front panel LED
Designed for floor, stacked, or a combo pole cup (insert and threaded)
Eight M10 threaded suspension points
PA Speaker
Configuration Active 3-Way
Total Power Capacity 2000 W
HF Driver 1 x 1.25″ / 32 mm Titanium Compression Driver
MF Driver 1 x 6.5″ / 165 mm
LF Driver 1 x 15″ / 38.1 cm Woofer
Frequency Range 38 Hz to 20 kHz -10 dB
Frequency Response 48 Hz to 20 kHz -3 dB
Maximum SPL 136 dB (Peak)
Coverage Angle 60° H x 40° V
Audio I/O 2 x Combo XLR-1/4″ TRS Line Input
1 x XLR 3-Pin Thru/Output
Signal Processing
Crossover Low-Pass:
700 Hz
2.9 kHz
AC Input Power 100 to 240 VAC, 50 / 60 Hz
Current Consumption 0.8 to 1.6 A
Mounting 8 x M10
Construction Material Metal Grille, Plywood
Dimensions 18 x 17 x 40″ / 1023 x 469 x 426 mm
Weight 84.2 lb / 38.2 kg


There are no reviews yet.

Be the first to review “Electro-Voice ETX-35P – Three-Way Powered Loudspeaker”

Your email address will not be published. Required fields are marked *