The all-new XTi 2 Series amps by Crown continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. There’s no debate – when you choose Crown’s XTi 2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. Crown’s 2002 XTi 2 Series power amplifier has up to 2,000 watts power.
Integrated Processing
- Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed
- Crossover filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control
- Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed
- Delay: For signal alignment of driver; 50 mS of total delay
- SubHarmonic synth: Takes the low-frequency content of the input signal and “synthesizes” a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type
- Peakx™ plus limiter: User defeatable limiter that allows users to control Threshold, Attack, and Release times
- Presets: 30 total presets, 29 of which are user-definableControls
- Level: Two front-panel rotary level controls, one for each channel
- Power switch: On/Off switch applies AC power to the amplifier
- Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout
- LCD Screen: Backlit liquid crystal display that shows preset and processing statusInput/Output Connectors
- Input connectors: XLR, one per channel
- Link/Out connector: Loop-thru signal from input connector for linking another amplifier, one per channel
- Output connectors: Two Neutrik® Speakon® NL4MP output connectors, Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable, Two binding post outputs (in parallel with Speakon® connectors)
- HiQnet™ USB connector: Type B, connects to HiQnet™ networkConstruction
- Chassis: Steel
- Front panel: Cast-aluminum
- Cooling: Proportional speed fan with front-to-rear airflowOverall System
Specifications: • Power output: 1,000 watts 2 ohm stereo per ch, 800 watts 4 ohm stereo per ch, 475 watts 8 ohm stereo per ch, 1,600 watts 8 ohm bridge-mono, 2,000 watts 4 ohms bridge-mono • Sensitivity (for full rated power at 4 ohms): 1.4V RMS • Frequency response (at 1 watt, 20 Hz – 20 kHz): 0 dB, –1 dB • S/N Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A weighted) • THD: <0.5% • Damping factor (20 Hz to 1 kHz):> 500 • Crosstalk (below rated power): 20 kHz – 1 kHz: >70 dB • Input impedance (nominal): 20k ohms balanced, 10k ohms unbalanced • Maximum input signal: 22 dBu typical • AC Line voltage and frequency configurations: 120 VAC 60 Hz • AC Line current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 8.3A; no more than 38 watts at idle • Operating temperature: 0°C to 40°C at 95% relative humidity (non-condensing) • Dimensions: 19″ W x 3.5″ H x 12.25″ D • Net weight: 18.5 lbs. (8.4 kg).
Item# CRNXTI2002
UPC: 871015005317
There are no reviews yet.