Williams Sound Wi-Fi Assist Listen Syst 3/Dante/WF T5 D/3 WF R1N/3 CCS 062/CHG 408 WF4

Williams Sound Wi-Fi Assist Listen Syst 3/Dante/WF T5 D/3 WF R1N/3 CCS 062/CHG 408 WF4

$2,329.00

Description

Williams Sound Wi-Fi Assist Listen Syst 3/Dante/WF T5 D/3 WF R1N/3 CCS 062/CHG 408 WF4

 

About Williams Sound WF SY5 PRO-3 D

– WF T5 D Transmitter –

WaveCAST is a Wi-Fi platform designed for pro-audio applications where high-quality sound is required. It is built on a hardware-based DSP audio system architecture, allowing system optimization to achieve the highest quality experience for the particular audio stream being delivered. Hearing assistance can be optimized for hearing loss, music can be optimized for high-fidelity playback, and voice can be set for maximum speech intelligibility. Custom pre-sets can also be established for specific performance applications.

Professional audio inputs on the WaveCAST include 1/4″ XLR connectors, phantom power and a line level output jack. In addition to multi-stage gain control inputs, the DSP features include AGC, limiters, high and low pass filter, and adjustable range compressor control. The 16-bit DAC provides a 48Khz sample rate for a smooth digital stream and minimizes digital harshness. WaveCAST supports both unicast and multicast network configurations. Up to four WaveCAST systems can be connected to the same Wi-Fi network to provide multiple listening channels supporting 45 users in unicast mode or 1500+ users in multicast mode.

The WaveCAST Dante interface is based on the Audinate UXT Ultimo chipset. This chipset supports both AES67 and SMPTE 2110. Dante’s Ultimo UXT support of AES67 and SMPTE 2110 allows integrators multiple audio options to chose from for greater interoperability with other audio equipment with their system design. This allows the WaveCAST Dante to be controlled by the Dante Controller the easy-to-use software from Audinate for setting up and managing audio routing of Dante-enabled products on an audio network.

The WaveCAST can have most settings changed via the front panel interface, or the hosted web interface. A remote programming guide is available upon request. This version of the WaveCAST is Dante compatible.

The new WaveCAST app provides an easy-to-use, intuitive user interface and is available in iOS or Android. Listeners easily select channel and volume level once their personal device is connected to the Wi-Fi network.

– WF R1N Receiver –

A dedicated receiver for the WaveCAST system. The WaveCAST App is installed on the receiver. The receiver can then be distributed as an assistive listening receiver to those who do not want to install the app on their personal device.This version of the WaveCAST is Dante compatible.

– CHG 404 WF 4-Slot Charger –

4-slot charging bay for WaveCAST Receivers and Digi-Wave DLT 400 and DLR 400 RCH.

– HED 024 Headphones –

Stereo headphones, adult size, 16 Ohm. Mild to moderate hearing loss rating. Replacement earpads: HED 023, HED 023-100.

– NKL 001 S Neckloops –

The NKL 001 S Neckloop is designed to magnetically couple the audio output from a Williams Sound unit into a hearing aid equipped with a T-Coil. It will also work with any audio device which has a 8-16 Ohm audio output through a 3.5mm jack. The neckloop works only with hearing aids equipped with a T-Coil. The NKL 001-S is designed to work with products that have stereo jacks.

Safety Breakaway Feature
Integrated safety breakaway device. In the event the neckloop cord becomes entangled with a object in motion, the breakaway device will disconnect the neckloop from the user.

– RPK 005 Rack Panel Kit –

Rack Panel Kit. Mounts one transmitter or modulator (1/2 space product) in one IEC rack space.

– IDP 008 ADA Wall Plaque –

The Williams Sound ADA Wall Plaque is a self-adhesive wall plaque that alerts your patrons to the fact that your establishment has a hearing assistance system. Perfect for theaters, auditoriums and more, the plaque is large and easy-to-see.

Williams Sound WF SY5 PRO-3 D Features

  • WF T5 D Transmitter
  • Dante interface is based on the Audinate UXT Ultimo chipset
  • Dante input
  • Audio presets hearing assistance, music, voice and custom
  • Professional audio DSP architecture
  • Supports 45 users in unicast mode or 1500+ users in multicast mode, dependent upon network configuration
  • Professional audio inputs: 1/4″/XLR connectors, phantom power, line level output jack
  • Works with free WaveCast iOS or Android apps
  • 16-bit DAC provides 48Khz sample rate
  • Single-channel audio streaming over Wi-F
  • NKL 001 S Neckloops Features
  • Integrated safety breakaway device
  • 18″ Cord
  • Adult size
  • 3.5 mm stereo plug
  • monoaural
  • 8-16 ohm
  • Recommended for PockeTalker 2.0, FM receivers and select IR receivers
  • For individuals with moderate to severe hearing loss

WF T5 D TransmitterJump to…

Color
Black/Silver with silver legends on the front, white legends on the back
Rack Mount
Standard 19″ Rack, one EIA rack space high, 1/2 space wide 1-2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits
Power Supply
Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz. IEC Line Cord; Output: 24 VDC, 750 mA, 18W. 2.5mm ID center positive barrel connector
Power ON Indicator
Push On/Push Off latching power button, backlit green indicates power ON, backlight off indicates power OFF, fading from bright to dark indicates Sleep Mode.
Temperature Range
Operating: 32 to 104 Degree F (0 to 40 Degree C)
Storage: -4 to 158 Degree F (-20 to 70 Degree C)
Audio Processor Functions
DSP based; Compression: 1:1, 1.5:1 or 2:1
High-pass and Low-pass Filter Frequency control
Frequency Response
31 – 16000 Hz, +/-3 dB (Music Audio Preset)
Signal-to-Noise Ratio
Greater than or equal to 74 dB Transmitted RF
Total Harmonic Distortion
Less than 0.25% @ 1 kHz (RF output)
Common Mode Rejection
Greater than 57 dB @ 1 kHz, Mic or Line
User Interface
Front panel buttons or hosted web interface
Dante
Yes
Audio Inputs
(1x) Combination 3-pin XLR, 1/4″ (TRS) jack for Mic or Line Level Analog Audio, Balanced or Unbalanced Line Level, or balanced or unbalanced microphone with Selectable Phantom Power
Audio Input Gain Adjust
In menu, adjustable to 0 to -50 dB, in 1dB steps
Phantom Power
14.4 VDC applied through 2.2 k Ohm resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4″ TRS jack
Audio Level Indicators
10-LED array that reads -18 to +9 dB at 3 dB intervals. 7 Green, 2 Amber, and 1 red LED. Green LEDs indicate normal operating audio level peaks, Amber LEDS indicate close to overload peaks, Red LED indicates overload peaks
Headphone Output
1/4″ TRS stereo jack, mono signal, 15.7 mW, maximum in 33 Ohm (level adjustable in menu 0 to -40 dB in 2 dB steps)
Line Output
RCA jack (black), -10 dBV (.32 VRMS); Output impedance 100 Ohm
Microphone (at Audio Input Gain = 0dB)
Nominal (1st Amber LED): -55 dBV (1.7 mV RMS)
Overload Warning (Displayed on Screen): -15 dBV (180 mV RMS)
Line (at Audio Input Gain = 0dB)
Nominal (1st Amber LED): -25 dBV (55 mV RMS)
Overload Warning (Displayed on Screen): +16 dBV (6.3 V RMS)
Ethernet
RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address
Operating Systems
Apple iOS 9.1 or newer; Android 6.0 or newer; Blackberry and windows not supported
Approvals
FCC, RoHS3, WEEE, Industry Canada, CE, PSE, RCM, CB Scheme
Dimensions (W x D x H)
8.45 x 8.25 x 1.72″ (21.5 x 21 x 4.4cm)
Weight
3 lb (1.36kg)

WF R1N ReceiverJump to…

Display
2.0″ (5cm) full color OLED Touchscreen
Receiver Jack
3.5mm standard mono jack
Battery Life
6 hours
Charge Time
About an hour
Approvals
FCC, RoHS3, WEEE, Industry Canada, CE, RCM, Telec
Dimensions (W x D x H)
1.89 x 0.5 x 4.46″ (48 x 12.7 x 113.3cm)

CCS 062 BK Receiver SkinsJump to…

Color
Black
Material
Silicone
Compatibility
WaveCAST Receiver

CHG 404 WF 4-Slot ChargerJump to…

Color
Black and clear plastic
Power Input
AC 100-220V 50/60Hz 0.5A (max)
Power Output
DC 5.0V 1.1A per bay (22W max)
Unit Capacity
4 Units
Indicators
Individual Charging Indicators: Blue LEDs light up dividing clear panels
Compatible Units
CHG 404 WF: WF R1
Approvals
WEEE, RoHS, CE, FCC, IC
Dimensions (L x W x H)
6 x 5 x 3″ (15.6 x 12.7 x 7.85cm)
Weight
0.7 lb (0.3kg)

HED 024 HeadphonesJump to…

Style
Stereo Headphones
Plug
3.5mm stereo
Cord
39″ (99.06cm)
Driver Size
30mm
Nominal Impedance
16 Ohm
Frequency Response
20 – 20kHz
Max Power Input
100 mW
Sensitivity
108 dB @ 1kHz
Replacement Pads
HED 023 (one pair)
Approvals
RoHS
Weight
2.1 oz (60g)

NIK 001 S NeckloopsJump to…

Color
Black
Connector
NKL 001-S: 3.5mm stereo plug with ring disconnected
Impedance
8-16 Ohms
Input Power
500 mW max
Magnetic Field Strength
25 mW input at 1000 Hz produces 1.7 A/m 6″ above the center of loop
85microW input produces 0.1 A/m (IEC Standard)
Approvals
RoHS, WEEE
Cord Length
18.5″ (46.9cm)
Weight
1.5 oz (42.5g)

RPK 005 Rack Panel KitJump to…

Compatibility
PPA T45, PPA T45NET, MOD 232
Approvals
RoHs, IEC
Size
Screws: 6-32 x 3/8″ (Each)

IDP 008 ADA Wall PlaqueJump to…

Dimensions (L x W x H)
10.37 x 6.25 x 0.13″ (26.3 x 15.8 x 0.31cm)

Additional information

Weight 1 lbs
Dimensions 10 × 10 × 20 in

Reviews

There are no reviews yet.

Be the first to review “Williams Sound Wi-Fi Assist Listen Syst 3/Dante/WF T5 D/3 WF R1N/3 CCS 062/CHG 408 WF4”

Your email address will not be published. Required fields are marked *

RELATED PRODUCTS

( 51 )
( 1 )
( 31 )
( 52 )
( 35 )
( 47 )
( 10 )
( 7 )
( 14 )
( 19 )
( 12 )
( 11 )
( 28 )
( 6 )
( 16 )
( 1 )
( 1 )
( 3 )
( 1 )
( 1 )
( 1 )
( 13 )
( 10 )
( 50 )
( 1 )
( 5 )
( 190 )
( 21 )
( 1 )
( 2 )
( 3 )
( 483 )
( 1 )
( 1 )
( 200 )
( 49 )
( 1 )
( 12 )
( 34 )
( 1 )
( 1 )
( 22 )
( 21 )
( 1 )
( 131 )
( 6 )
( 1 )
( 1 )
( 73 )
( 19 )
( 16 )
( 148 )
( 21 )
( 5 )
( 1 )
( 14 )