Description
Robust, reliable connectivity to Dante-enabled consoles or networks.
The D800-Dante A-Net Distributor from Aviom includes all of their D800’s advanced features, then adds Danteâ„¢ digital audio network connectivity. It provides power and audio for up to 8 Aviom Personal Mixers, and its network interface can directly connect to an existing Dante audio network. The D800-Dante has a standard Pro16e output, which outputs a 64-channel A-Net stream comprised of the Dante network’s audio channels. This stream can be sent to any Pro16 or Pro16e device (standard Pro16 devices can only utilize channels 1-16), including a standard D800, which can then be used for connecting additional Aviom Personal Mixers. Like the standard D800, the D800-Dante includes support for Network Mix Back, Ethernet for iOS devices, and seamless integration of both A360 and A-16II Personal Mixers.
Features
- Direct connectivity to Dante-enabled consoles & audio networks
- Supports up to 64 Dante network channels
- Distributes power & audio to up to 8 A320/A360 mixers
- Un-powered Pro16e A-Net Out for thru connections
- Assign Stereo Links via DIP switches on front panel
Specifications
- A-Net to/from Personal Mixers (front panel):
- (8) locking RJ45 connectors, powered
- 2-position switch (I/II) accommodates A-16II and A320 (|) and the bidirectional A360 Personal Mixer (||)
- A-Net In or A-Net Bridge In: Accepts Pro16 or Pro16e A-Net; (1) locking RJ45 connector
- A-Net Out (Rear panel): Pro16e A-Net; (1) locking RJ45 connector, unpowered
- A-Net Mixes Out:
- Pro16e A-Net;
- (1) locking RJ45 connector, unpowered; Provides up to 16 channels of Network Mix Backâ„¢ data from up to (8) A360 Personal Mixers
- Ethernet: (1) RJ45 connector
- LEDs: Power On (red); Sync (green)
- USB: Used for firmware updates
- A-Net Cables – Front Panel Connections:
- Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
- Unshielded Cat-5e cable may be used on all rear panel connections
- Dante Primary I/O: EtherCon RJ45 connector
- Dante Secondary I/O: EtherCon RJ45 connector
- Stereo Link: (4) DIP Switch blocks; used to set up to 32 channel pairs as stereo links
- LEDs: Error (red); Sync (green); 1GB Active (red); Network Activity (green)
- Output Voltage for Personal Mixers:
- 24VDC, 0.5 amp
- Transmitted over the Cat-5e cable
- Power Supply: Internal, universal switching type, IEC connector
- Input Voltage:
- 100-240VAC, 50-60Hz, 300W
- Fuse – 250VAC~ T4AL
- Dimensions: 19″ W x 14.25″ D x 3.5″ (2U) H (482.6 x 362 x 88.9 mm)
- Weight: 12.0 lbs (5.44 kg)
Reviews
There are no reviews yet.