PVXp™ 15 Bluetooth® 15-inch Powered Loudspeaker

PVXp™ 15 Bluetooth® 15-inch Powered Loudspeaker



PVXp™ 15 Bluetooth® 15-inch Powered Loudspeaker


The PVXp™ 15 Bluetooth® features a reliable bi-amped power section that provides a total of 980 Watts of peak dynamic power with DSP-based compression and limiting. This enclosure features a 15″ heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX14™ compression driver with a 1.4 inch titanium diaphragm on a 100 degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp™ 15 Bluetooth® provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4 inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8″ AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator can be set to light when power is on, and when the “soft-limiting” DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters, are accessed via a one-knob selector.

  • RX14™ compression driver, with 1.4 inch titanium diaphragm
  • Reliable fan-cooled power amps with DSP protection
  • Total of 980W peak dynamic power
  • DSP control for precise crossover, EQ and limiting functions
  • Bluetooth input is via a dedicated input channel
  • Mix/Thru Output is via a male XLR jack
  • Durable plastic injection-molded trapezoidal enclosure
  • Extra angled section on right side allows floor monitor use
  • Pole mount molded-in for 1 3/8″ diameter poles
  • Top, bottom and right side flying point inserts
  • 15 heavy-duty woofer with 2 3/8″ voice coil & 50 oz. magnet
  • Full-coverage heavy-duty perforated steel grilles, with powder coat finish
  • DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision
  • Peavey’s Quadratic Throat Waveguide technology, 100 by 50 degree coverage
  • Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
  • Analog input is via a combo female XLR and 1/4″ TRS phone jack with balanced input
  • Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8″ jack
  • Each channel has a level control and a 3-band EQ section to adjust and shape the input signals


  • Powered:Yes
  • Power Configuration:Bi-amped
  • Channels:3-channel mixer
  • LF Driver Size:15″ woofer
  • HF Driver Size:1.4″ titanium diaphragm
  • LF Driver Power Amp:840W
  • HF Driver Power Amp:140W
  • Total Power:980W (peak)
  • Inputs:1 x XLR-1/4″ combo, 1 x 1/8″ TRS
  • Outputs:1 x XLR
  • Bluetooth:Yes
  • Wireless:Bluetooth
  • Frequency Range:53Hz-20khz
  • Frequency Response:59Hz-20kHz (±3dB)
  • Crossover Frequency:24dB/octave @ 1800Hz
  • Maximum Peak SPL:127dB SPL @ 1m
  • Horizontal Coverage Angle:100°
  • Vertical Coverage Angle:50°
  • Signal Processing:DSP, 24bit/48kHz
  • Enclosure Material:Black injection-molded plastic
  • Mounting Options:Pole, Floor Wedge
  • Power Source:Standard IEC AC cable
  • Height:28.25″
  • Width:18.9″
  • Depth:18.71″
  • Weight:50 lbs.
  • Manufacturer Part Number:03620490


There are no reviews yet.

Be the first to review “PVXp™ 15 Bluetooth® 15-inch Powered Loudspeaker”

Your email address will not be published. Required fields are marked *