Description

Samson SXD5000 Power Amplifier with DSP

The Samson SXD5000 Power Amplifier with DSP is for live sound reinforcement. It is used in various environments in audio applications to provide clean power for speakers such as in DJ setups, houses of worship, front of house, live stage performance and more. It features 750W power per side at 4 Ω. This amp is designed to provide clean output with low distortion and a wide dynamic range over a frequency spectrum of 20 Hz to 20 kHz.

The SXD5000 is built with advanced DSP and is controlled via a backlit LCD for use in low-lit environments. The power amp provides extensive control over high and low pass filters, a 3-band EQ, output limiter and delay time for speaker alignment. It also features four presets to provide optimal settings for various standard speaker configurations. A digital pass code security lock is also provided.

All of the SXD5000’s amp channels offer multi-segment LED metering and level controls with detents. Settings of gain and sensitivity can be monitored on the front panel LCD. Input connections for the power amp are made via balanced combination XLR and 1/4″ connectors. The amp provides both Binding Post and Speakon connectors for speakers. It is built with an all-steel chassis in a 19″ rack mount design and has convenient carry handles making it ready for the rigors of the road. A power cord in included.

Features LEDs for optimal use on dark stages and indicates your current operating mode and filter settings

Editable presets for DJ, live sound and commercial installations

Multi-segment LED metering on each channel

Individual channel level controls with detents for accurate setting of gain and sensitivity

Dual rack space design

All steel chassis design and convenient carry handles make it ready for the road

UPC: 809164014362

Samson SXD5000 Specs

Rated Output Power	Stereo Both Channels Driven: 8 Ω 500 W 4 Ω 750 W
Signal to Noise Ratio	20 Hz to 20 kHz: >100 dB
Distortion	SMPTE-IM: 0.02%
Input Sensitivity	At 8 Ω Voltage Gain: 5 dBu
Voltage Gain	32 dB
Output Circuit	2-Tier Class H
Current Consumption	115 VAC: At 1/8 Rated Power 4 Ω: 3.8 A At 1/3 Rated Power 4 Ω: 10 A At Rated Power 4 Ω, Max: 13.6 A
Distortion	Typical @ 4 Ω: 20 Hz to 20 kHz, 10 dB Below Rated Power: 0.02 % 1 kHz, Rated Power: 1 %
Frequency Response	At 8 Ω 1 W, 0/-1 dB: 20 Hz to 20 kHz
Damping Factor	400 Hz: 120
Input Impedance	20 kΩ balanced
Input Clipping Level	10 Vrms (22 dBu)
Cooling	Continuously variable speed fan cooling
Connector	Inputs: 2 x 3-pin XLR 2 x 1/4″ (0.63 mm)TRS, balanced Outputs: 4 x Binding post 2 x Speakon
Indicators	Signal, -20 dB, 10 dB, limit, thermal
Protection	Short circuit, open circuit, thermal, RF protection Load protected against DC faults

DSP

Display	2 x 16 character LCD
Modes	Manual mode, 2 full range, mono 2-way, sub/sat, 2 subs
I/O	Stereo, mono A+B dual, mono A+B link, parallel A dual, parallel A link
Digital	Dynamics Function: Filter, crossover, gain offset, EQ, limiter Digital Delay Function: Max 20 ms per channel
Digital Equalizer	Function Per Channel fO: 1/12 octave at 20 to 20 kHz Gain: ± 12 dB Q: 0.5 to 5.0 Presets: DJ, vocal, live sound, install, rock, dance and jazz
Setup	Lock controls with code, factory reset
Dimensions (L x W x H)	19.0 x 13.0 x 3.5″ (482 x 330 x 88 mm)
Weight	28.6 lb (13 kg)

Packaging Info

Box Dimensions (LxWxH)

22.13 x 16.54 x 7.28″

Additional information

Weight	1 lbs
Dimensions	20 × 10 × 10 in

Reviews

There are no reviews yet.

Be the first to review “Samson SXD5000 Power Amplifier with DSP”

New ARRIVALS

New ARRIVALS

studio monitors

interfaces

New ARRIVALS

New ARRIVALS

New ARRIVALS

New ARRIVALS