$1,199.99
The Peavey IPR2 7500 2-Channel Power Amp features an advanced design that makes it lightweight while increasing output power, reliability and thermal efficiency. This amplifier is designed with a resonant switch-mode power supply and a high-speed Class D topology that yields a high audio resolution and efficiency. Advanced technology and extensive protection circuitry allow for efficient operation under difficult loads and power conditions.
The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2Ω. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. This amp also features 2-channel independent fourth order Linkwitz-Riley crossovers and a variable-speed fan housed in a lightweight aluminum chassis. The amplifier’s high-efficiency design allows it to operate at very low temperatures without the need for massive heat sinks to cool.
| Rated Power | 2ch x 2 Ω: 4,750 W 20ms repetitive burst / 3,750 W 1% THD both channels driven @ 1 kHz 2ch x 4 Ω: 2,800 W 20ms repetitive burst / 2,450 W 1% THD / 2,020 W 0.15% THD, both channels driven @ 1 kHz 2ch x 8 Ω: 1,550 W 20ms repetitive burst / 1,425 W 1% THD / 1,200 W 0.15% THD, both channels driven @ 1 kHz |
| RMS Power | 1 x 3,850 W at 2 Ω 1 x 2,400 W at 4 Ω 1 x 1,330 W at 8 Ω 2 x 3,750 W at 2 Ω 2 x 2,022 W at 4 Ω 2 x 1,250 W at 8 Ω |
| Minimum Load Impedance | 2 Ω (minimum) |
| RMS Voltage Swing | 124 V (maximum) |
| Frequency Response | 20Hz – 25kHz; +0dB, -3dB
20 Hz to 20 kHz 2ch x 2 Ω: <0.5% @ 3,280 W 20 Hz to 4 kHz, decreasing to 3,000 W @ 20 kHz, both channels driven |
| Input CMRR | > – 75 dB @ 1 kHz |
| Voltage Gain | x 40 (+32 dB) |
| Crossover | 100 Hz switchable 2nd order high pass and 3rd low pass per channel |
| Crosstalk | > -85 dB @ 1 kHz @ 1,000 W power @ 8 Ω |
| Hum and Noise | > -106 dB, “A” weighted referenced to rated power @ 4 Ω |
| Slew Rate | > 12 V / μs |
| Damping Factor | > 200:1 @ 20 Hz to 1 kHz @ 8 Ω |
| Input Sensitivity | 2.25 V +/- 3% for 1 kHz 4 Ω rated power, 2.195 V +/- 3% for 1 kHz 2 Ω rated power |
| Input Impedance | 20 kΩ, balanced and 10 kΩ, unbalanced |
| Current Draw | @ 1/8: 2,210 VA (1,440 W) @ 2 Ω, 1,550 VA (950 W) @ 4 Ω, 982 VA (560 W) @ 8 Ω @ 1/3: 4,260 VA (3,150 W) @ 2 Ω, 3,120 VA (2,160 W) @ 4 Ω, 1,890 VA (1,200 W) @ 8 Ω |
| Idle Consumption | 250 VA, 120 W |
| Cooling | 3 temperature-dependent variable speed fans |
| Controls | 2 front-panel attenuators, crossover select switch for HPF, Normal and LPF |
| Indicators | 5 x LED indicators per channel: Active, Signal, DDT, Temperature and DC |
| Protection | Thermal, DC, subsonic, incorrect loads, under and over voltage |
| Connectors | Inputs: Dual combination 1/4″ XLR Outputs: 2 x 1/4″ thru, 1 x 2-pin & 1 x 4-pin twist-lock connector |
| Construction | 0.062″ (0.16 cm) thick aluminum |
| Dimensions | 3.5 x 19.0 x 17.0″ (9.0 x 48.3 x 43.2 cm) Handle: 0.6″ (1.5 cm) |
| Weight | 14.6 lb (6.6 kg) (without power cord) |
| Package Weight | 21.9 lb |
| Box Dimensions (LxWxH) | 21.7 x 21 x 6.8″ |
| Weight | 1 lbs |
|---|---|
| Dimensions | 20 × 15 × 10 in |
Reviews
There are no reviews yet.