Williams Sound Wi-Fi Assist Listen Syst 4/Dante/WAP/WF T5 D/4 WF R1N/4 CCS 062/CHG 408 WF4

Williams Sound Wi-Fi Assist Listen Syst 4/Dante/WAP/WF T5 D/4 WF R1N/4 CCS 062/CHG 408 WF4

$3,095.00

Description

Williams Sound Wi-Fi Assist Listen Syst 4/Dante/WAP/WF T5 D/4 WF R1N/4 CCS 062/CHG 408 WF4

 

About Williams Sound WF SY5 PRO-4 D WAP

– WF T5 D Transmitter –

WaveCAST is a Wi-Fi platform designed for pro-audio applications where high-quality sound is required. It is built on a hardware-based DSP audio system architecture, allowing system optimization to achieve the highest quality experience for the particular audio stream being delivered. Hearing assistance can be optimized for hearing loss, music can be optimized for high-fidelity playback, and voice can be set for maximum speech intelligibility. Custom pre-sets can also be established for specific performance applications.

Professional audio inputs on the WaveCAST include 1/4″ XLR connectors, phantom power and a line level output jack. In addition to multi-stage gain control inputs, the DSP features include AGC, limiters, high and low pass filter, and adjustable range compressor control. The 16-bit DAC provides a 48Khz sample rate for a smooth digital stream and minimizes digital harshness. WaveCAST supports both unicast and multicast network configurations. Up to four WaveCAST systems can be connected to the same Wi-Fi network to provide multiple listening channels — supporting 45 users in unicast mode or 1500+ users in multicast mode.

The WaveCAST Dante interface is based on the Audinate UXT Ultimo chipset. This chipset supports both AES67 and SMPTE 2110. Dante’s Ultimo UXT support of AES67 and SMPTE 2110 allows integrators multiple audio options to chose from for greater interoperability with other audio equipment with their system design. This allows the WaveCAST Dante to be controlled by the Dante Controller — the easy-to-use software from Audinate for setting up and managing audio routing of Dante-enabled products on an audio network.

The WaveCAST can have most settings changed via the front panel interface, or the hosted web interface. A remote programming guide is available upon request. This version of the system is Dante compatible

The new WaveCAST app provides an easy-to-use, intuitive user interface and is available in iOS or Android. Listeners easily select channel and volume level once their personal device is connected to the Wi-Fi network.

– WF R1N Receivers –

A dedicated receiver for the WaveCAST system. The WaveCAST App is installed on the receiver. The receiver can then be distributed as an assistive listening receiver to those who do not want to install the app on their personal device.

– WF WR10 Access Point –

Wireless Access Point for WaveCAST Systems. This device is only available in certain pre-packaged systems.

– CHG 404 WF 4-Slot Charger –

4-slot charging bay for WaveCAST Receivers and Digi-Wave DLT 400 and DLR 400 RCH.

– EAR 022 Surround Earphones –

Around-ear speaker earphone. Hangs on outside of ear. Excellent sound quality. Can be used with all Williams Sound receivers and Pocketalkers. Rigorously tested and approved for quality, reliability and compatibility with Williams Sound systems

– NKL 001 S Neckloops –

The NKL 001 S Neckloop is designed to magnetically couple the audio output from a Williams Sound unit into a hearing aid equipped with a T-Coil. It will also work with any audio device which has a 8-16 Ohm audio output through a 3.5mm jack. The neckloop works only with hearing aids equipped with a T-Coil. The NKL 001-S is designed to work with products that have stereo jacks.

Safety Breakaway Feature
Integrated safety breakaway device. In the event the neckloop cord becomes entangled with a object in motion, the breakaway device will disconnect the neckloop from the user.

– RPK 005 Rack Panel Kit –

Rack Panel Kit. Mounts one transmitter or modulator (1/2 space product) in one IEC rack space.

– IDP 008 ADA Wall Plaque –

The Williams Sound ADA Wall Plaque is a self-adhesive wall plaque that alerts your patrons to the fact that your establishment has a hearing assistance system. Perfect for theaters, auditoriums and more, the plaque is large and easy-to-see.

Williams Sound WF SY5 PRO-4 D WAP Features

  • WF T5 D Transmitter Features
  • Dante interface is based on the Audinate UXT Ultimo chipset
  • Dante input. Audio presets hearing assistance, music, voice and custom
  • Professional audio DSP architecture
  • Supports 45 users in unicast mode or 1500+ users in multicast mode, dependent upon network configuration
  • Professional audio inputs: 1/4″/XLR connectors, phantom power, line level output jack
  • Works with free WaveCast iOS or Android apps
  • 16-bit DAC provides 48Khz sample rate
  • Single-channel audio streaming over Wi-F
  • EAR 022 Surround Earphones Features
  • Hangs on outside of the ear
  • Excellent sound quality
  • 3.5mm mono plug
  • 1m cord
  • Monoaural
  • 32 ohm
  • Recommended for FM receivers and select IR receivers
  • Designed for individuals with mild and low gain hearing loss
  • NKL 001 S Neckloops Features
  • Integrated safety breakaway device
  • 18″ Cord
  • Adult size
  • 3.5 mm stereo plug
  • monoaural
  • 8-16 ohm
  • Recommended for PockeTalker 2.0, FM receivers and select IR receivers
  • For individuals with moderate to severe hearing loss
RCA jack (black), -10 dBV (.32 VRMS); Output impedance 100 Ohm
Microphone (at Audio Input Gain = 0dB)
Nominal (1st Amber LED): -55 dBV (1.7 mV RMS)
Overload Warning (Displayed on Screen): -15 dBV (180 mV RMS)
Line (at Audio Input Gain = 0dB)
Nominal (1st Amber LED): -25 dBV (55 mV RMS)
Overload Warning (Displayed on Screen): +16 dBV (6.3 V RMS)
Ethernet
RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address
Operating Systems
Apple iOS 9.1 or newer; Android 6.0 or newer; Blackberry and windows not supported
Approvals
FCC, RoHS3, WEEE, Industry Canada, CE, PSE, RCM, CB Scheme
Dimensions (W x D x H)
8.45 x 8.25 x 1.72″ (21.5 x 21 x 4.4cm)
Weight
3 lb (1.36kg)

WF R1N Receiver

Display
2″ (5cm) full color OLED Touchscreen
Receiver Jack
3.5mm standard mono jack
Battery Life
6 hours
Charge Time
About an hour
Approvals
FCC, RoHS3, WEEE, Industry Canada, CE, RCM, Telec
Dimensions (W x D x H)
1.89 x 0.5 x 4.46″ (48 x 12.7 x 113.3cm)

WF WR10 Access Point

Standards Compliance
2.4GHz: IEEE802.11n, IEEE802.11g, IEEE 802.11b;IEEE802.3, IEEE802.3u, IEEE802.3ab
Interface
One 10/100/1000M WAN Port (Auto MDI/MDIX);
Four 10/100/1000M LAN Ports (Auto MDI/MDIX);
One USB 3.0 Port
Antenna
Four 5dBi Detachable Omni-Directional Antennas
Power
Input: 12 VDC @ 3 A
Max Power Consumption
35 W
Wireless Speed
2.4 GHz: 1000 Mbps; 5GHz: 2167 Mbps
Frequency
Concurrent 2.4 GHz and 5 GHz
Wireless Security
WPA/WPA2-PSK, WPA/WPA2, AES
Approvals
CE, FCC, RoHS, IC, RCM
Dimensions
9.3 x 7 x 1.65″ (236 x 178 x 42cm)
Weight
1.8 lb (0.82kg)

CCS 062 BK Receiver Skins

Color
Black
Material
Silicone
Compatibility
WaveCAST Receiver

CHG 404 WF 4-Slot Charger

Color
Black and clear plastic
Power Input
AC 100-220V 50/60Hz 0.5A (max)
Power Output
DC 5.0V 1.1A per bay (22W max)
Unit Capacity
4 Units
Indicators
Individual Charging Indicators: Blue LEDs light up dividing clear panels
Compatible Units
CHG 404 WF: WF R1
Approvals
WEEE, RoHS, CE, FCC, IC
Dimensions (L x W x H)
6 x 5 x 3″ (15.6 x 12.7 x 7.85cm)
Weight
0.7 lb (0.3kg)

EAR 022 Surround Earphone

Style
Around-ear speaker
Plug
3.5mm mono
Cord
39″ (99.06cm)
Driver Size
23mm
Nominal Impedance
32 Ohm
Frequency Response
20 – 20kHz
Max Power Input
30 mW
Sensitivity
118 dB @ 1kHz
Weight
0.5 oz (15g)

NIK 001 S Neckloops

Color
Black
Connector
NKL 001-S: 3.5mm stereo plug with ring disconnected
Impedance
8-16 Ohms
Input Power
500 mW max
Magnetic Field Strength
25 mW input at 1000 Hz produces 1.7 A/m 6″ above the center of loop
85microW input produces 0.1 A/m (IEC Standard)
Approvals
RoHS, WEEE
Cord Length
18.5″ (46.9cm)
Weight
1.5 oz (42.5g)

RPK 005 Rack Panel KitJump to…

Compatibility
PPA T45, PPA T45NET, MOD 232
Approvals
RoHs, IEC
Size
Screws: 6-32 x 3/8″ (Each)

IDP 008 ADA Wall PlaqueJump to…

Dimensions (L x W x H)
10.37 x 6.25 x 0.13″ (26.3 x 15.8 x 0.31cm)

Additional information

Weight 1 lbs
Dimensions 10 × 10 × 20 in

Reviews

There are no reviews yet.

Be the first to review “Williams Sound Wi-Fi Assist Listen Syst 4/Dante/WAP/WF T5 D/4 WF R1N/4 CCS 062/CHG 408 WF4”

Your email address will not be published. Required fields are marked *

RELATED PRODUCTS

( 51 )
( 1 )
( 31 )
( 52 )
( 35 )
( 47 )
( 10 )
( 7 )
( 14 )
( 19 )
( 12 )
( 11 )
( 28 )
( 6 )
( 16 )
( 1 )
( 1 )
( 3 )
( 1 )
( 1 )
( 1 )
( 13 )
( 10 )
( 50 )
( 1 )
( 5 )
( 190 )
( 21 )
( 1 )
( 2 )
( 3 )
( 483 )
( 1 )
( 1 )
( 200 )
( 49 )
( 1 )
( 12 )
( 34 )
( 1 )
( 1 )
( 22 )
( 21 )
( 1 )
( 131 )
( 6 )
( 1 )
( 1 )
( 73 )
( 19 )
( 16 )
( 148 )
( 21 )
( 5 )
( 1 )
( 14 )