Williams Sound Digi-Wave 400 Series Interpretation System

Williams Sound Digi-Wave 400 Series Interpretation System

$19,795.00

Description

Williams Sound Digi-Wave 400 Series Interpretation System for 4 Languages plus floor RCH

 

  • System includes (5) DLT 400 transceivers, (50) DLR 400 RCH receivers, (4) MIC 158 headset microphones, (50) EAR 022 surround earphones, (5) CHG 412 12-bay charger, (1) CCS 054 carry case, (4) CCS 061 GR grey silicone skin, and (1) CCS 061 BK black silicone skins
  • Communication as a group, or broadcast your audio one way. Use the system the way you need
  • DLR receiver supports unlimited listeners
  • Backward compatibility with Digi-Wave 300 series
  • Crystal-clear digital sound quality
  • Completely Portable – No base station or rack-mounted components required
  • 128+87-bit encryption and PIN codes
  • Simplifies usage and set up
  • Increase range
Dimensions 26.2″ L x 19.7″ W x 13.2″ H
Weight 23 lbs.
Note The CCS 054 replaces the CCS 049.
chg 412
Dimensions 9″L x 7″W x 1.5″H (23 cm L x 17.8 cm W x 3.8 cm H)
Weight 1.8 lbs (845 g)
Enclosure Black, ABS plastic with metal base
Power Supply Input TFP 047, 90-240 VAC input, 1.5 A max *
Power Supply Universal DC adapter, 5 VDC – 6A output, center positive
Charging Time ~5 hours
Unit Capacity 12 Units
Compatible Units Transceiver: DLT 400, Receiver: DLR 400 RCH
Indicators Charge status indicators on DLT or DLR
Approvals CE, FCC, WEEE, RoHS, CB
Warranty 2-year (cables and power supply warranty for 90 days)
dlr 400 rch
Dimensions 4.22″W x 2.60″H x 0.50″D (107.3 mm x 66 mm x 12.6 mm)
Weight 3.3 oz (94 g) including battery
Color Black
Battery type Lithium Polymer with smart charge built into transceiver; 1800 mAH
Battery life Up to 32 hrs per charge @ 1ch Rx
Power Save Auto Sleep Mode after 5 minutes of no RF signal from compatible devices
Charge time 5 hrs. approx.
Operating frequencies 2.4 GHz (ISM band); 2402 – 2476 MHz FHSS
Audio Frequency response
(-3dB Level) Intercom Mode: 100 – 7,200 Hz
Other Modes: 100 – 11,500 Hz
SNR 73 dB (A-weighted)
THD 0.1 % (Default Volume, 1kHz)
Headphone Output 3.5 mm TRRS headphone jack; 25 mW, R32 Ω
Line Audio Output USB-C, Adjustable Level
Range Up to 900 ft (274 m) (depending upon environmental conditions)
Modulation FSK
RF Sensitivity -92 dBm
Security 87 bit encryption (300 Series Compatiable), 87+128 bit Encryption, Encrpytion PIN, Lock for settings
Indicators OLED
LEDs Bi-color, changing green and red LED at top
Charging Connectors USB-C; Two contacts for use with CHG 412
Compatible Units DLT 400, DLT 300 with some limitations
Operating Tempurature Range 14º to 113ºF (-10º to 45ºC)
Approvals FCC, Industry Canada, CE, RoHS 3, WEEE, RCM, ANATEL, KC, Giteki
Warranty 2 years parts and labor (90 days on accessories); 6 months on internal battery
dlt 400
Dimensions 4.22″W x 2.60″H x 0.50″D (107.3 mm x 66 mm x 12.6 mm)
Weight 3.3 oz (94 g) including battery
Color Black/Silver (Front/Back)
Case Material Black ABS plastic
Battery type Lithium Polymer with smart charge built into transceiver; 1800 mAH
Battery life Up to 16 hrs talk time per charge@ 1ch Tx and 1ch Rx
Power Save Auto Sleep Mode after 5 minutes of no RF signal from compatible devices
Charge time 5 hrs. approx.
Operating frequencies 2.4 GHz (ISM band); 2402 – 2476 MHz FHSS
Audio Frequency response (-3dB Level) Intercom Mode: 100 – 7,200 Hz, Other Modes: 100 – 11,500 Hz
SNR 73 dB (A-weighted, default Rx volume with mic input )
THD 0.1 % (Default Volume, 1kHz)
Microphone input Internal microphone (disabled when MIC jack engaged) and 3.5 mm phone jack (sleeve) with electret microphone bias, adjustable gain with 63dB range.
Line Input USB-C, Adjustable level
Audio Output Headphone: 3.5 mm TRRS headphone jack; 25 mW, R 32 ohms, Line: USB-C, Adjustable level
Audio Output Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041)
Range Up to 900 ft (274 m) (depending upon environmental conditions)
Modulation FSK
RF Output 19 dBm Typical
Security 87 bit encryption (300 Series Compatiable), 87+128 bit Encryption, Encrpytion PIN, Lock for settings
Side tone -6 dB below volume, tone variation (Off, Low and High settings available)
Indicators OLED
LEDs Red LED around Talk button when enabled; Bi-color, changing green and red LED at top
Charging Connectors USB-C; Two contacts for use with CHG 412
Compatible Receiver DLR 400 RCH, DLR 400 ALK, DLT 300 with some limitations and DLR 360 with some limitations
Operating Tempurature Range 14º to 113ºF (-10º to 45ºC)
Approvals FCC, Industry Canada, CE, RoHS 3, WEEE, RCM, ANATEL, KC, Giteki
Warranty 2 years parts and labor (90 days on accessories); 6 months on internal battery
ear 022
Style Around-ear speaker
Plug 3.5mm mono
Cord 39″
Driver Size 23 mm
Nominal Impedance 32Ω
Freq. Response 20 – 20kHz
Weight 15g
Max Power Input 30 mW
Sensitivity 118 dB @ 1kHz

Additional information

Weight 1 lbs
Dimensions 10 × 10 × 20 in

Reviews

There are no reviews yet.

Be the first to review “Williams Sound Digi-Wave 400 Series Interpretation System”

Your email address will not be published. Required fields are marked *

RELATED PRODUCTS

( 51 )
( 1 )
( 31 )
( 52 )
( 35 )
( 47 )
( 10 )
( 7 )
( 14 )
( 19 )
( 12 )
( 11 )
( 28 )
( 6 )
( 16 )
( 1 )
( 1 )
( 3 )
( 1 )
( 1 )
( 1 )
( 13 )
( 10 )
( 50 )
( 1 )
( 5 )
( 190 )
( 21 )
( 1 )
( 2 )
( 3 )
( 483 )
( 1 )
( 1 )
( 200 )
( 49 )
( 1 )
( 12 )
( 34 )
( 1 )
( 1 )
( 22 )
( 21 )
( 1 )
( 131 )
( 6 )
( 1 )
( 1 )
( 73 )
( 19 )
( 16 )
( 148 )
( 21 )
( 5 )
( 1 )
( 14 )