Tascam SD-20M 4 Track Solid State Recorder With Microphone Inputs


Compare

$295.00

The Tascam SD-20M is a 4-track recorder for installation. The 1-U rackmount includes a pair of microphone preamps with phantom power for direct microphone recording. Both the mic inputs and the line inputs can be recorded simultaneously in four-track mode. The dual mode captures a copy of your audio at a lower level, as insurance against distorted takes.

The SD-20M includes battery backup system: AA batteries can keep recording for hours in case of power loss. A wired remote or footswitch can be attached to control recording and playback. Variable speed playback allows the playback to be changed without affecting the pitch.

Tascam SD-20M Features:

  • Four-track solid-state recorder
  • Stereo or four-track recording (two mic/line inputs and two line inputs)
  • Two microphone inputs on XLR/jack combo jacks, compatible with 4 dBu line level, switchable phantom power ( 48 V)
  • Two RCA line inputs on rear side for tracks 3-4 (compatible with -10 dBV line level
  • Two recording formats supported:
  • WAV/BWF: 44.1-96 kHz, 16/24 bit
  • MP3: 32 – 320 Kbit/s
  • Simple user interface
  • Low-cut filter with three levels (40 / 80 / 120 Hz)
  • File divide feature
  • Dual recording function records a copy of your audio at a lower level for a distortion-proof safety track
  • Variable speed playback changes speed without changing the pitch (0.5 times to 1.5 times in 0.1 increments)
  • Auto-recording functin to automatically start recording based on input level
  • CA stereo line outputs
  • Standard stereo headphones output
  • Remote jack for wired or footswitch control
  • AA battery backup – keeps recordingn even after power loss
  • SDXC media slot supports cards up to 128 GB
  • Compact 1U rack-mountable chassis

Item# TEASD20M

 

UPC: 043774032211

SKU: TEASD20M Category: Tags: ,

Tascam SD-20M Specs

Recording Media SD card (64 MB to 2 GB)
SDHC card (4 GB to 32 GB)
SDXC card (48 GB to 128 GB)
Audio Recording/Playback Format BWF: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24-bit
WAV: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24-bit
MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kBps
Number of Channels 4 channels (stereo x 2)
Mic/Line Inputs 2 x Combo Jacks: XLR-3-31 (1: ground, 2: hot, 3: cold)
1/4″ (6.3 mm) TRS jack (Tip: hot, ring: cold, sleeve: ground)
Mic Input Impedance Front jacks set to Mic
2.7 kOhms (phantom power supported)
Maximum Input Level: 0 dBu (gain: low)
Minimum Input Level: −67 dBu (gain: high)
Line Input Impedance Front jacks set to Line
10 kOhms or higher
Nominal Input Level +4 dBu
Maximum Input Level: +20 dBu
Minimum Input Level: -12 dBu
Line Input Impedance Line inputs 3/L and 4/R (unbalanced, RCA jacks)
10 kOhms or higher
Nominal Input Level -10 dBV
Maximum Input Level: +6 dBV
Minimum Input Level: -26 dBV
Audio Output Jacks Nominal Output Level -10 dBV
Maximum Output Level: +6 dBV
Output Impedance: 200 ohms
Headphone Output 1/4″ (6.3 mm) standard stereo jack
Maximum Output Power: 20 mW + 20 mW (32 ohms load, 0.1 % distortion)
Remote Control Connector 1/16″ (2.5 mm) TRS micro jack
Frequency Response 20 Hz to 20 kHz +1/-3 dB (input 1-2 to output, Fs 44.1/48 kHz)
20 Hz to 40 kHz +1/−3 dB (input 1-2 to output, Fs 96 kHz)
Distortion 0.01 % or less (Input 1-2 to output, Fs 44.1/48/96 kHz)
Signal to Noise Ratio 100 dB or more (input 1-2 to output, Fs 44.1/48/96 kHz)
Power Supply Dedicated AC adapter (TASCAM PS-P1220E), 4 AA batteries (alkaline, NiMH, or lithium)
Power Consumption 5 W (maximum)
Input Current 1 A (maximum)
Operating Temperature Range 41 to 95°F (5 to 35°C)
Dimensions (W x H x D) 19 x 1.8 x 12″ (483 x 45 x 300 mm)
Weight 6.2 lb (2.8 kg) (including batteries)
6.2 lb (2.7 kg) (excluding batteries)
Packaging Info
Package Weight 9.2 lb
Box Dimensions (LxWxH) 21.4 x 15.6 x 5.3″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Tascam SD-20M 4 Track Solid State Recorder With Microphone Inputs”

There are no reviews yet.