Sennheiser XSW IEM SET Stereo In-Ear Wireless Monitoring System

Sennheiser XSW IEM SET Stereo In-Ear Wireless Monitoring System

$599.00

Description

Sennheiser XSW IEM SET, a complete starter set for wireless in-ear monitoring aimed at musicians rehearsing or performing live on a club stage or in a house of worship. It delivers the renowned Sennheiser sound and solid wireless reliability packaged into a convenient, entry-level system that’s simple to use, right out of the box. Create your own stereo mix with EQ, limiter, panning, and Focus mode and hear yourself clearly along with everyone else in the band, while moving freely on stage.

The all-in-one XSW IEM SET includes the XSW IEM SR stereo transmitter, XSW IEM EK stereo receiver, IE 4 in-ear headphones, external power supply, and a rackmount kit. The system provides up to 6 hours of continuous use with two AA batteries in the receiver—at a range up to 330′. The transmitter can send signal to as many receivers as you want (additional receivers available separately). Up to 12 transmitters can operate simultaneously in the same frequency band.

Your Easy Entry into Personal Wireless Monitoring

  • The rugged XSW IEM SR stereo transmitter features a metal housing designed for extended use in small clubs and can be used as part of a rackmounted system or standalone on a tabletop. Two combo XLR-1/4″ inputs enable you to send either a stereo or two different mono audio sources at the same time, from either 1/4″ or XLR connections. A backlit LCD screen on the front panel allows for easy setups, even on dark stages. You can preview your in-ear mix locally with the headphone output on the front. Setting up gain, mono or stereo options, input sensitivity, or frequency channels takes just a matter of seconds thanks to the clear, simple menu.
  • The lightweight XSW IEM EK stereo bodypack receiver clips on your clothing or belt and is easy to conceal and comfortable for the talent to wear. A standard 3.5mm jack lets you plug in the included IE 4 earphones or optional earphones of your choice. The top LED shows battery and link status at a glance, while the front LCD panel allows for individual fine-tuning of your personal mix, from balance and Focus modes to EQ and Limiter.
  • The IE 4 earphones reproduce accurate audio with a wide dynamic range and increased bass response. They are equipped with exchangeable ear sleeves designed to provide a comfortable fit

Sennheiser XSW IEM SET (A) Specs

Transmitter
Frequency Band A: 476 to 500 MHz
Wireless Technology Analog, UHF
Modulation FM Stereo
Transmitting RF Power 30 mW
Number of RF Channels 960
Switching Bandwidth 24 MHz
Frequency Step Size 25 kHz
Frequency Banks 8 Banks with 12 Aligned and Precalculated Frequencies Each
Frequency Scanning Manual
Max Transmitters per Band 12
Max Operating Range 330′ / 100 m (Line of Sight)
Nominal/Peak Deviation ±15 kHz / ±24 kHz
Antenna Output BNC Socket, 50 Ohms
Frequency Response 45 Hz to 15 kHz
Inputs L + Mono / Right: 2 x XLR-1/4″ / 6.3 mm Jack Combo Socket, Electronically Balanced
Output 1/4″ / 6.3 mm TRS, Headphones Out
Total Harmonic Distortion (THD) <0.9%
Signal-to-Noise Ratio ≥88 dB, at Nominal Load and Peak Deviation
Power Input Rating +12 VDC
Current Consumption Approximately 400 mA
Housing Metal
Temperature Range 32 to 104°F / 0 to 40°C
Dimensions Approximately 7.9 x 5 x 1.7″ / 200 x 128 x 42 mm
Weight Approximately 24.7 oz / 700 g
Receiver
Modulation Wideband, Stereo FM
Frequency Band A: 476 to 500 MHz
Switching Bandwidth Up to 24 MHz
Sync Method IR
Nominal/Peak Deviation ±15 kHz / ±24 kHz
Squelch 10 µV, Fixed
Signal-to-Noise Ratio ≥88 dB, 1 mV, Peak Deviation
Total Harmonic Distortion (THD) ≤ 1%
Output Level 2 x 1.25 Veff at 16 Ohms
Equalization High Boost EQ: +10 dB at 13 kHz
Limiter -10 dB
Frequency Response 45 Hz to 15 kHz
Crosstalk Typically 45 dB (50 Hz to 10 kHz)
Power Supply 2 x AA Batteries, 1.5 V
Nominal Voltage 3 V
Housing Plastic
Operating Time Approximately 6 Hours, Depending on Volume Level
Temperature Range 32 to 104°F / 0 to 40°C
Dimensions 3.7 x 2.8 x 1″ / 95 x 70 x 26 mm
Weight 3.9 oz / 110 g, Including Batteries
Earphones
Transducer Dynamic
Frequency Response 40 Hz to 20 kHz
SPL 106 dB, (1 kHz, 1 mW)
Nominal Impedance 6 Ohms
Cable Length 4.6′ / 1.4 m
Connector 1/8″ / 3.5 mm TRS, Stereo, Gold-Plated
Temperature Range 23 to 122°F / -5 to 50°C
Packaging Info
Package Weight 4.61 lb
Box Dimensions (LxWxH) 14.5 x 13 x 2.38″

Additional information

Weight 1 lbs
Dimensions 10 × 10 × 5 in

Reviews

There are no reviews yet.

Be the first to review “Sennheiser XSW IEM SET Stereo In-Ear Wireless Monitoring System”

Your email address will not be published. Required fields are marked *

RELATED PRODUCTS

( 51 )
( 1 )
( 31 )
( 52 )
( 35 )
( 47 )
( 10 )
( 7 )
( 14 )
( 19 )
( 12 )
( 11 )
( 28 )
( 6 )
( 16 )
( 1 )
( 1 )
( 3 )
( 1 )
( 1 )
( 1 )
( 13 )
( 10 )
( 50 )
( 1 )
( 5 )
( 190 )
( 21 )
( 1 )
( 2 )
( 3 )
( 483 )
( 1 )
( 1 )
( 200 )
( 49 )
( 1 )
( 12 )
( 34 )
( 1 )
( 1 )
( 22 )
( 21 )
( 1 )
( 131 )
( 6 )
( 1 )
( 1 )
( 73 )
( 19 )
( 16 )
( 148 )
( 21 )
( 5 )
( 1 )
( 14 )