,

Samson SXD7000 Power Amplifier with DSP


$499.99

Samson SXD7000 Power Amplifier with DSP

 

The Samson SXD7000 Power Amplifier with DSP is for live sound reinforcement. It is used in various environments in audio applications to provide clean power for speakers such as in DJ setups, houses of worship, front of house, live stage performance and more. It features 1000W power per side at 4 Ω. This amp is designed to provide clean output with low distortion and a wide dynamic range over a frequency spectrum of 20 Hz to 20 kHz.

The SXD7000 is built with advanced DSP and is controlled via a backlit LCD for use in low-lit environments. The power amp provides extensive control over high and low pass filters, a 3-band EQ, output limiter and delay time for speaker alignment. It also features four presets to provide optimal settings for various standard speaker configurations. A digital pass code security lock is also provided.

All of the SXD7000’s amp channels offer multi-segment LED metering and level controls with detents. Settings of gain and sensitivity can be monitored on the front panel LCD. Input connections for the power amp are made via balanced combination XLR and 1/4″ connectors. The amp provides both Binding Post and Speakon connectors for speakers. It is built with an all-steel chassis in a 19″ rack mount design and has convenient carry handles making it ready for the rigors of the road. A power cord in included.

Features LEDs for optimal use on dark stages and indicates your current operating mode and filter settings
Editable presets for DJ, live sound and commercial installations
Multi-segment LED metering on each channel
Individual channel level controls with detents for accurate setting of gain and sensitivity
Dual rack space design
All steel chassis design and convenient carry handles make it ready for the road
UPC: 809164014379
Categories: ,

Samson SXD7000 Specs

Rated Output Power Stereo Both Channels Driven:
8 Ω 700 W
4 Ω 1000 W
Signal to Noise Ratio 20 Hz to 20 kHz: >100 dB
Distortion SMPTE-IM: 0.02%
Input Sensitivity At 8 Ω Voltage Gain: 5 dBu
Voltage Gain 34 dB
Output Circuit 2-Tier Class H
Current Consumption 115 VAC:
At 1/8 Rated Power 4 Ω: 5.5 A
At 1/3 Rated Power 4 Ω: 9.2 A
At Rated Power 4 Ω, Max: 16 A
Distortion Typical @ 4 Ω:
20 Hz to 20 kHz, 10 dB Below Rated Power: 0.02 %
1 kHz, Rated Power: 1 %
Frequency Response At 8 Ω 1 W, 0/-1 dB: 20 Hz to 20 kHz
Damping Factor 400 Hz: 120
Input Impedance 20 kΩ balanced
Input Clipping Level 10 Vrms (22 dBu)
Cooling Continuously variable speed fan cooling
Connector Inputs: 2 x 3-pin XLR
2 x 1/4″ (0.63 mm) TRS, balanced
Outputs: 4 x Binding post
2 x Speakon
Indicators Signal, -20 dB, 10 dB, limit, thermal
Protection Short circuit, open circuit, thermal, RF protection
Load protected against DC faults
DSP
Display 2 x 16 character LCD
Modes Manual mode, 2 full range, mono 2-way, sub/sat, 2 subs
I/O Stereo, mono A+B dual, mono A+B link, parallel A dual, parallel A link
Digital Dynamics Function: Filter, crossover, gain offset, EQ, limiter
Digital Delay Function: Max 20 ms per channel
Digital Equalizer Function Per Channel
fO: 1/12 octave at 20 to 20 kHz
Gain: ± 12 dB
Q: 0.5 to 5.0
Presets: DJ, vocal, live sound, install, rock, dance and jazz
Setup Lock controls with code, factory reset
Dimensions (L x W x H) 19.0 x 13.0 x 3.5″ (482 x 330 x 88 mm)
Weight 33 lb (15 kg)
Packaging Info
Package Weight 35.55 lb
Box Dimensions (LxWxH) 22.25 x 17 x 8″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Samson SXD7000 Power Amplifier with DSP”

There are no reviews yet.

Leaving so soon?Register for our weekly product deals!

We send out weekly deals without you having to lift a finger. Simply subscribe to our email list to receive the best deals on our top products every week. We promise not to inundate you with emails, and should you lose interest you can unsubscribe at any time.