Description

Lab Gruppen PD3000 3000 Watt 2-Channel Amplifier with Precise Power Management

The PD3000
The PD3000 is a two-channel amplifier delivering 2 X 1500W of power for entry/mid-level live sound applications. PD Series amplifiers employ our unique IDEEA Class-D output stage that is ideally matched to the rated power output. To provide flexibility, each channel offers sufficient voltage swing and current capacity to drive loads in any impedance without any additional configuration. In order to have low thermal losses as well as a high voltage swing, the design is based on a permanently bridged output.

Applications
PD3000 is a proven and reliable Class-D amplifier and can provide superb audio performance in both background and foreground music sound systems. PD3000 suits a wide range of applications such as entry/mid-level touring, live portable sound, hotels, bars and restaurants, house of worship, performance spaces, and many more.

Simple Control
Just plug it in, crank it up and play. The comprehensive circuit protection will protect your PD3000 and your speakers against short circuits, DC and thermal overload.

Inputs
Balanced XLR and TRS input and linking connectors with optimized sensitivities. Easy set up with configuration of modes and X-over functionality.

Speaker Outputs
PD3000 amplifier employ our unique IDEEA Class-D output stage that is ideally matched to the rated power output. To provide flexibility, each channel offers sufficient voltage swing and current capacity to drive loads in any impedance without any additional configuration. In order to have low thermal losses as well as a high voltage swing, the design is based on a permanently bridged output.

Rugged and Lightweight Rack Mount Chassis
Appropriate and reliable power amplification is vital to any audio system. Inadequate or faulty power amplifiers could cause damage to loudspeakers, or in some cases to the power amplifiers themselves. To prevent damage or service interruptions, the PD3000 amplifier offer advanced features to protect both internal circuits and connected loads.

Lab Gruppen PD3000 Features

Two channel amplifier delivering 2x 1,500 Watts
Precise power management guarantees performance and efficiency
Proven and reliable Class-D amplifier stage
Highly efficient Switch Mode Power Supply (SMPS)
Speaker Protect Limiter for maximum level output and reliable driver protection
Accurate 8-segment Signal and Limit LEDs for performance monitoring
Integrated crossover with low-cut, high-cut and full range mode
Comprehensive circuit protection against short circuits, DC and thermal overload
Balanced XLR and TRS input connectors with optimised sensitivities
Professional speakON output connectors
Efficient cooling with temperature-controlled fan
Rugged and lightweight rack mount chassis for maximum durability

Lab Gruppen PD3000 Specifications

Jump to…

GeneralJump to…

Number of amplifier channels: 2
Peak total output all channels driven: 3000 W
Peak output voltage per channel: 115 V
Peak output current per channel: 32 A
Bridge mode: No
Output circuit type: Class-D

Amplifier OutputJump to…

All channels driven: 2 Ohm per channel, stereo: 1000 W
4 Ohm per channel, stereo: 1500 W
8 Ohm per channel, stereo: 800 W

Audio PerformanceJump to…

THD+N 20 Hz – 20 kHz @ 1 W: < 0.1%
THD+N @ 1kHz, 1 dB below clip: < 0.1%
Signal-to-noise: >90 dB
Channel separation (Crosstalk) @ 1 kHz: >75 dB
Frequency response: 10 Hz to 20 kHz, +0.5/ -1 dB
Input impedance: 10 k Ohm unbalanced, 20 k Ohm balanced
Distortion,1/8 rated power: < 0.1%

SystemJump to…

Controls: Front: Power switch
Gain controls (channels A and B)Rear: Stereo / mono,
switchable Xover: LF / full range / HF, switchable
Crossover frequency: 100 Hz

IndicatorsJump to…

Power: RDY LEDs lit green
Limit, per channel: LIM LEDs lit red
Signal, per channel: -30 dB, -24 dB, -18 dB, -12 dB, -9 dB, -6 dB, -3 dB, LEDs lit green/orange
Thermal Warning, per channel: RDY LED blink orange
Thermal Warning 90%, PSU: Both RDY LEDs blink orange
Thermal fault, per channel: RDY LED blink red
Thermal fault 100%, PSU: Both RDY LEDs blink red
Fault, channel: RDY LED lit constantly red
Fault, device: Both RDY LEDs constantly lit red

ConnectorsJump to…

Inputs / link: 2x XLR
2x 1/4″ TRS
Outputs: Neutrik speakON (2 x NLT4)
Mains connector: Locking IEC appliance inlet, C14

Protection FeaturesJump to…

Cooling: Two fans front-to-rear air flow, temperature controller speed
Amplifier protection: Thermal and DC protection, Rail sensing and peak current limiting.
Load protection: Controlled start and shutdown,
behavior, DC-fault protection,
Short-circuit protection

Power SupplyJump to…

Voltage: Separate 230 V and 115 V versions available. Not selectable on the product.
USA / Canada / Japan: 100-120 V, 50/60 Hz
UK / Australia / Europe / Korea / China: 220-240 V, 50/60 Hz
Power consumption @ 4 ohms: 1050 W

BatteryJump to…

Battery Info: No battery used
Battery Material: –
Battery Quantity: 0
Battery Type: –

PhysicalJump to…

Finish: Black painted aluminum chassis and gray front
Approvals: CE, cTUVus, PSE, RCM, CCC, FCC
Dimensions (H x W x D): 3.7 x 19 x 12.8″ (93 x 483 x 326mm)
Weight: 14.3 lbs (6.5kg

Reviews

There are no reviews yet.

Be the first to review “Lab Gruppen PD3000 3000 Watt 2-Channel Amplifier with Precise Power Management”

New ARRIVALS

Wireless Mics

Wired Mics

headworn mics

New ARRIVALS

studio monitors

mixers

interfaces

New ARRIVALS

New ARRIVALS

New ARRIVALS

New ARRIVALS