, , ,

Crown XTi 1002 Power Amplifier Call for the Special Pricing


$569.00

Crown XTi 1002 XTi 2 Series Power Amplifier

The all-new XTi 2 Series amps by Crown continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. There’s no debate – when you choose Crown’s XTi 2 Series, you’re choosing one of the most powerful and innovative amplifiers on the market today. Crown’s 1002 XTi 2 Series power amplifier has up to 1,400 watts power.

With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility. You also have greatly improved control capabilities. The addition of Peakx Plus™ Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning.

Plus, you’ll now be able to tailor fan speed for specific applications and have software visibility of the power supply temperature and AC line voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you – and the world.

Integrated Processing

  • Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed
  • Crossover filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control
  • Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed
  • Delay: For signal alignment of driver; 50 mS of total delay
  • SubHarmonic synth: Takes the low-frequency content of the input signal and “synthesizes” a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type
  • Peakx™ plus limiter: User defeatable limiter that allows users to control Threshold, Attack, and Release times
  • Presets: 30 total presets, 29 of which are user-definableControls
  • Level: Two front-panel rotary level controls, one for each channel
  • Power switch: On/Off switch applies AC power to the amplifier
  • Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout
  • LCD Screen: Backlit liquid crystal display that shows preset and processing statusInput/Output Connectors
  • Input connectors: XLR, one per channel
  • Link/Out connector: Loop-thru signal from input connector for linking another amplifier, one per channel
  • Output connectors: Two Neutrik® Speakon® NL4MP output connectors, Channel-1 Speakon® is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable, Two binding post outputs (in parallel with Speakon® connectors)
  • HiQnet™ USB connector: Type B, connects to HiQnet™ networkConstruction
  • Chassis: Steel
  • Front panel: Cast-aluminum
  • Cooling: Proportional speed fan with front-to-rear airflowOverall System

Specifications: • Power output: 700 watts 2 ohm stereo per ch, 500 watts 4 ohm stereo per ch, 275 watts 8 ohm stereo per ch, 1,000 watts 8 ohm bridge-mono, 1,400 watts 4 ohms bridge-mono • Sensitivity (for full rated power at 4 ohms): 1.4V RMS • Frequency response (at 1 watt, 20 Hz – 20 kHz): 0 dB, –1 dB • S/N Ratio (below rated 1 kHz power at 8 ohms):  100 dB (A weighted) • THD: <0.5% • Damping factor (20 Hz to 1 kHz):> 500 • Crosstalk (below rated power): 20 kHz – 1 kHz: >70 dB • Input impedance (nominal): 20k ohms balanced, 10k ohms unbalanced • Maximum input signal: 22 dBu typical • AC Line voltage and frequency configurations: 120 VAC 60 Hz • AC Line current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 6.8A; no more than 38 watts at idle • Operating temperature: 0°C to 40°C at 95% relative humidity (non-condensing) • Dimensions: 19″ W x 3.5″ H x 12.25″ D • Net weight: 18.5 lbs. (8.4 kg).

Item# CRNXTI1002

UPC: 871015005232

SKU: CRNXTI1002 Categories: , , , Tags: ,

Crown Audio 1002 specs

Output Power 700W @ 2 Ohms Stereo (per Channel)
500W @ 4 Ohms Stereo (per Channel)
275W @ 8 Ohms Stereo (per Channel)
1400W @ 4 Ohms Bridged-Mono
1000W @ 8 Ohms Bridged-Mono
Damping Factor 20Hz to 1kHz > 500
Input Sensitivity 1.4Vrms
Input Impedance 20k Ohms (Balanced)
10 kOhms (Unbalanced)
Gain 32.9dB @ 1kHz, 8 Ohm Rated Output
Frequency Response (at 1 watt, 20Hz – 20kHz) +0dB, -1dB
Signal-to-Noise Ratio XTi1002/2002/4002: 100dB (A weighted)
XTi6002: 103dB (A weighted)
Total Harmonic Distortion (THD) < 0.5%
Connections Input Connectors: XLR, one per channel
Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.
Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
HiQnet USB Connector: Type B, connects to HiQnet network.
Controls Front Panel Level: Two front-panel rotary level controls, one for each channel
Power Switch: On/Off switch applies AC power to the amplifier
Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout
LCD Screen: Backlit liquid crystal display that shows preset and processing status
Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip
Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions
Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
Cooling Proportional speed fan with front-to-rear airflow.
Power Consumption 6.8A; no more than 38W at idle
Power Requirements 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
Dimensions 19 x 3.5 x 12.25″ (48.26 x 8.89 x 31.11cm)
Weight 18.5 lbs (8.4kg)
Specialties DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer
Protection for Short Circuits, Overloads, and Overheating
Packaging Info
Package Weight 22.0 lb
Box Dimensions (LxWxH) 22.5 x 19.0 x 7.0″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Crown XTi 1002 Power Amplifier Call for the Special Pricing”

There are no reviews yet.

Leaving so soon?Register for our weekly product deals!

We send out weekly deals without you having to lift a finger. Simply subscribe to our email list to receive the best deals on our top products every week. We promise not to inundate you with emails, and should you lose interest you can unsubscribe at any time.